A Whirlpool washer at a home on Parkway Blvd in Alliance, OH had completely lost power, showing no indicator lights even though the outlet tested fine. Samuel visited the home and found the control board had failed and was not responding despite receiving proper voltage. The customer decided to replace the unit, and no charge … Read more
A Whirlpool washer on 23rd Street Northwest in Canton wasn’t responding to commands and made loud noise when plugged in. We diagnosed an F3E1 error code pointing to the main control board failure. The Problem The customer reported that the control panel was not working and the washer made loud noise when plugged in. The … Read more
We serviced a Whirlpool washer in Atwater that wouldn’t drain or spin, with the control board appearing unresponsive. The customer reported the washer filled up with water but couldn’t complete its cycle. The Problem The washer filled up with water but would not drain or spin, and the washer board seemed to be unresponsive. The … Read more
A Whirlpool washer in East Canton wasn’t switching into spin cycle after rinse and would go back to wash then stop. The customer could manually select “drain & spin” mode and it would work fine. We found a stored error code for long fill or no fill caused by a partially obstructed cold water screen. … Read more
A Whirlpool washer in North Canton wasn’t agitating during wash cycles. We diagnosed the issue and found that agitator splines had corroded and stripped the transmission shaft. The Problem The customer reported their washer not agitating during operation. The drum would fill with water but clothes weren’t being moved around properly during the wash cycle. … Read more