Frigidaire Range Repair (Model PLCS389DCB) – Canal Fulton, OH
The oven on this Frigidaire range wouldn’t heat due to a failed bake element. We confirmed 240V and replaced the element to restore baking.
The oven on this Frigidaire range wouldn’t heat due to a failed bake element. We confirmed 240V and replaced the element to restore baking.
The large burner on this GE range was heating poorly. Testing found the burner thermostat open; replacing the burner restored full, even heat.
Broiler appeared inoperative. Verified normal operation and showed correct broil settings; no parts needed.
Oven wouldn’t light while surface burners worked. Weak bake igniter drawing low amperage; replacing the igniter restored normal preheat (~8.5 minutes).
A Frigidaire range in Uniontown was experiencing a confusing problem — the bake feature wasn’t working properly, and when turned on, it started broiling instead of baking at the entered temperature. Our diagnosis revealed a control board failure, but unfortunately parts are no longer available for this model. The Problem The customer reported that the … Read more
We recently completed a range repair on East Buchtel in Akron for a customer whose GE stove wouldn’t turn off unless unplugged. Our diagnosis revealed a faulty main control board that needed replacement. The Problem The customer reported that their stove won’t turn off unless they unplug it. This is a clear indication of a … Read more
A Samsung range in Alliance, OH stopped heating properly after the self-clean cycle ran. The customer reported that only half of the stove would heat up and the double oven wasn’t working. Our diagnosis revealed a failed lower bake igniter that needed replacement. The Problem The customer contacted us because their double oven and only … Read more
A KitchenAid double oven range on Lauren Avenue in Massillon wasn’t heating in either oven compartment, though the stovetop burners worked fine. Samuel Willhite found both bake igniters had failed and needed replacement. The Problem The customer reported that neither of the ovens work, though the stove works but not the ovens. This is a … Read more
A GE range on Diamond Street Northeast in Canton, OH had a timer that would not stop going off when plugged in. The homeowner had to keep the range unplugged to stop the constant noise. Our diagnosis revealed the timer had failed completely. The Problem The customer reported that the timer will not stop going … Read more
We received a call from a customer in Canton, OH reporting their GE range had issues with the oven function. Gas stove stove works but oven and oven light does not. Our diagnosis revealed the control board needed replacement. The Problem The customer contacted us because their gas stove stove works but oven and oven … Read more