A customer on Laurel Green Drive Northeast in North Canton called with a familiar problem — their Whirlpool refrigerator had stopped working again with the same control panel issue affecting the middle drawer. They’d already tried unplugging it for 10 minutes with no success. The Problem The refrigerator stopped working again last night. The customer … Read more
A Whirlpool washer in Homeworth developed a locked lid that wouldn’t unlock. Our diagnosis revealed significant damage to the control board that made repair impractical for this older unit. The Problem The customer reported that the lid is locked and won’t unlock. This prevented normal operation of the washer, leaving laundry stranded inside the machine. … Read more
A Dover homeowner called about their Whirlpool washer making noise while operating. Our diagnosis revealed the bearings were going bad in the washer — a common failure point that creates grinding or rumbling sounds during the wash cycle. The Problem The customer reported their Whirlpool front-load washer was making noise while operating. This type of … Read more
A Whirlpool washer on 37th Street Northwest in Canton was throwing an LF error code after just a few minutes of operation. The customer also reported a broken front leg that occurred from the mixing machine. Our diagnosis revealed a failed water valve and damaged leveling foot that needed replacement. The Problem The customer contacted … Read more
A Whirlpool dryer in Salem was making noise that sounded like tennis balls in it. When we opened it up, we found worn support components that needed replacement with a complete maintenance kit. The Problem The customer reported their Whirlpool dryer sounded like tennis balls in it during operation. This type of noise typically indicates … Read more
A Whirlpool ice maker in Minerva wasn’t dumping ice despite making it properly. When we arrived for the scheduled service call, the icemaker was cycling properly and functioning as expected. The Problem The customer reported their ice maker makes ice but won’t dump. This is a common complaint that can indicate issues with the harvest … Read more
A Canton homeowner called when their Whirlpool washer was washing fine but wouldn’t drain or spin. When we arrived at the Fulton Road address, we found the lid switch had failed completely. The Problem The customer reported their washer washes fine but won’t drain or spin. The machine would fill and agitate normally during the … Read more
A Whirlpool washer in Navarre was making loud noises during the spin cycle, with the customer suspecting bearing failure. Our diagnosis confirmed the bearings had indeed failed, requiring a complete bearing assembly replacement to restore quiet operation. The Problem The customer reported that the washer sounds loud when spinning and suspected it needs bearing replaced. … Read more
A customer in Deerfield, OH called about their Whirlpool dryer that won’t turn on with no lights or anything, even after checking the breaker. Our diagnosis revealed this wasn’t actually a dryer problem at all. The Problem The customer reported their dryer won’t turn on with no lights or anything. They had already checked the … Read more
A Canton homeowner called when her Whirlpool refrigerator stopped cooling entirely. What looked like a major appliance failure turned out to be an electrical issue with the wall outlet itself. The Problem The customer reported the refrigerator was not cooling at all. No refrigeration meant food spoilage and an urgent need for diagnosis. Diagnosis Testing … Read more