Bosch Dishwasher Repair (Model SHX4TF5UC/14) – New Philadelphia, OH
The control panel buttons on the Bosch dishwasher were unresponsive, but cleaning and repairs restored functionality.
The control panel buttons on the Bosch dishwasher were unresponsive, but cleaning and repairs restored functionality.
The dishwasher door opened too far, causing the tray to fall out. Replacing the hinges and door panel fixed the issue.
The dishwasher was stuck in a continuous wash cycle and wouldn’t drain. The issue was resolved by clearing a time delay.
The dishwasher was stopping mid-cycle with water remaining inside. Replacing the bent door hinges resolved the issue.
The dishwasher displayed a heat element 9 error code, which was resolved by replacing the heating element and pump assembly.
We responded to a service call on Larchwood Circle NW in Canton, OH for a Bosch dishwasher displaying an E3100 error code. Upon inspection, we found the unit had no drain and the drain pump was not clearing the tub properly. The Problem The customer reported an E3100 error code appearing on their Bosch dishwasher. … Read more
We received a service call in North Canton for a Bosch dishwasher showing a heat pump fault and draining failure with error code E61-03. The customer was frustrated after multiple previous repairs including wash pump replacement under warranty and self-installed drain pump and water valve replacements. The Problem The customer reported a heat pump fault, … Read more
A Canton homeowner called about their Admiral dishwasher with a handle that had come loose. We found the screws had backed out of the handle assembly and secured them properly with thread-locking compound. The Problem The customer reported the handle is loose on their Admiral dishwasher. This made opening and closing the dishwasher door difficult … Read more
The dishwasher displayed a heat element 9 error code, which was resolved by replacing the heating element and pump assembly.
We received a service call from East Canton for a Bosch dishwasher that interrupted wash cycle when it would not drain. After the customer cleaned the filter, it drained and finished the run but now makes a noise when washing or rinsing. The Problem Dishwasher interrupted wash cycle when it would not drain. I cleaned … Read more