A GE dishwasher in Malvern, OH had no power to controls. We diagnosed a failed UI board and installed a replacement with proper personality jumper configuration. The Problem The customer reported no power to controls on their GE dishwasher. The control panel was completely unresponsive with no display or button function. Diagnosis Testing revealed the … Read more
We responded to a service call in Canton, OH for a Whirlpool dishwasher that turns on but isn’t filling up with water. The customer expected a major repair, but our diagnosis revealed a much simpler issue with the water supply. The Problem The customer reported that their Whirlpool dishwasher turns on but isn’t filling up … Read more
The dishwasher was unresponsive with no lights, but after replacing the control board, it is now functioning properly.
The dishwasher was working intermittently due to an electrical issue caused by improper installation. The control board was replaced to resolve the problem.
The dishwasher failed to start despite having power. The control board was replaced to restore functionality.
The dishwasher displayed a heat element 9 error code, which was resolved by replacing the heating element and pump assembly.
The dishwasher was not draining at the end of the cycle, but after knocking out the plug in the disposal, it started draining properly.
The dishwasher was not cleaning properly due to clogged spray arms, which were cleaned and leveled for optimal performance.
The dishwasher displayed an I20 code and would not operate. We replaced the pressure sensor to restore functionality.
The dishwasher wasn’t cleaning effectively and left water spots. The issue was resolved by fixing the top spray arm’s position.