A Frigidaire dishwasher on Lynch Street SW in Massillon was leaking water again after a recent repair. The customer called us back for what turned out to be a loose turbidity sensor at the bottom of the sump. The Problem The customer reported that their dishwasher was leaking water again. This was a follow-up call … Read more
A Frigidaire dishwasher in North Canton wasn’t latching properly, with the door failing to secure mid-cycle. The customer suspected the latch mechanism was broken, but our diagnosis revealed a different root cause entirely. The Problem The door will not latch. From what I can tell, the latch isn’t just stuck I believe it is broken. … Read more
The dishwasher wouldn’t turn on, and replacing the UI top control board resolved the issue.
A homeowner in Minerva called about their Admiral dishwasher that wouldn’t start and was displaying error code UO. Our diagnosis revealed the vent assembly on the tub had failed, preventing the dishwasher from starting. The Problem The dishwasher won’t start. It displays error code UO. Diagnosis The vent assembly on the tub had failed. This … Read more
We returned to a Massillon home to address a recurring Admiral dishwasher with a frozen control panel where no buttons would work. This was the second time we’d serviced this FFBD2411NS0A for the same issue, and our diagnostic process revealed an unexpected electrical solution. The Problem The customer reported that the control panel was frozen … Read more
We received a service call in Canton for a GE dishwasher that would not turn on at all. The customer had already checked the circuit and everything seemed fine, but the unit remained completely unresponsive. The Problem The dishwasher would not turn on. The customer had checked the circuit and everything seemed to be fine, … Read more
A Canton homeowner called about their Whirlpool dishwasher that ran multiple cycles but left dishes dirty and gritty with detergent packets still intact at the bottom. Our diagnosis revealed an intermittent wash circulation issue where the wash motor doesn’t consistently start, preventing proper cleaning and detergent dissolution. The Problem The customer reported: “I’ve ran it … Read more
We responded to a Frigidaire dishwasher repair call in Uniontown, OH where the machine turns on and a little water runs in and then it just sits there. When we arrived, the machine was completely dead due to a poor electrical connection in the junction box. The Problem The customer reported that their dishwasher would … Read more
We responded to a dishwasher repair call on Hogan Way Northwest in Canton, OH for an Admiral DUT25401B showing an E01 error. The customer reported the E01 error was still occurring after previous attempts to fix it. Upon inspection, we discovered the root cause was a loose installation component affecting the water supply. The Problem … Read more
A Whirlpool dishwasher in North Canton was experiencing erratic control panel behavior with lights blinking and flashing across multiple buttons. The customer had already tried resetting the power five times, but the touch panel remained unresponsive and displayed confusing light patterns. The Problem The customer reported that lights are blinking on the touch panel. After … Read more