Admiral Dishwasher Repair (Model FFBD2406NB5A) – Alliance, OH
The dishwasher’s sprayers weren’t functioning, but after replacing the plate and support, it is now working fine.
The dishwasher’s sprayers weren’t functioning, but after replacing the plate and support, it is now working fine.
The dishwasher was leaking, causing water damage to the flooring and ceiling. Replacing the washer pump and door gasket resolved the issue.
The dishwasher wouldn’t drain properly, but after clearing a blockage in the disposer, it started functioning again.
The dishwasher was stuck in the wash cycle and wouldn’t advance. A new sensor was installed to resolve the issue.
The dishwasher was not getting water and was humming. The pressure switch was installed to resolve the issue.
The dishwasher displayed flashing F2 and E2 errors without being turned on. Replacing the user interface board resolved the issue.
The dishwasher had no power due to a wall switch being turned off. Once the switch was turned back on, the appliance functioned normally.
The dishwasher was leaking, but after leveling and adjusting the door seal, it is no longer leaking.
The dishwasher was shutting off after a few minutes of operation. Replacing the main control board resolved the issue.
The dishwasher was not draining completely, causing water to remain in the tub. A plugged drain hose was replaced to resolve the issue.