A Samsung dishwasher in Massillon was leaking water onto the floor through cracked rubber stripping along the bottom of the door. After inspection, we found this model has been problematic for leaking through the vent due to lime buildup affecting the seal. The Problem The customer reported that rubber stripping along bottom of the door … Read more
A Thermador dishwasher on Johnstown Road Northeast in Dover wasn’t secured to the granite countertop and had drainage issues causing floor leaks. Our diagnosis revealed multiple mounting and plumbing problems that needed immediate attention. The Problem The customer reported their dishwasher was not secured to granite, loose, had a plugged drain, and was leaking onto … Read more
A Samsung dishwasher on Franklin Place NW in Canton was beeping and not draining after a sink backup. When we arrived, we found water had accumulated in the leak pan underneath the unit, triggering the safety sensors. The Problem The customer reported their dishwasher was beeping and not draining after sink backup. The unit had … Read more
A customer in Massillon called about their leaking Maytag dishwasher. After two service visits, we determined there was no active leak and the unit was functioning properly. The Problem The customer reported a leaking dish washer and remained concerned about potential water damage even after our initial repair. Diagnosis On the first visit, we removed … Read more
The dishwasher turned on but wouldn’t run. Replaced the drain pump and upgraded the pressure sensor to restore functionality.
The dishwasher failed to drain properly, but after clearing the plugged drain, it was restored to full functionality.
The dishwasher was leaking water onto the floor and not draining properly. A splash guard was installed to resolve the issue.
The dishwasher was not draining, leaving standing water after cycles. Replacing the solenoid and timer resolved the issue.
The dishwasher was not filling properly and would stop shortly after starting. Replacing the washer pump resolved the issue.
The dishwasher was leaving soap residue on dishes due to a shut-off water valve. After turning it on, the issue was resolved.