A Whirlpool dishwasher in North Canton wasn’t running properly — it said it was running but water wasn’t going into the parts to spin. We found the water circulation pump had failed, preventing proper water flow throughout the wash cycle. The Problem The dishwasher will not run. It says that it’s running but the water … Read more
A customer in Massillon called about their Admiral dishwasher having control panel issues. The lights would just flash on the user interface and it would not initiate a wash cycle. After replacing the user interface, the dishwasher works properly. The Problem The customer reported something wrong with the control panel. The lights would just flash … Read more
A Kenmore dishwasher on Rocky Hollow Drive in Akron had top sliding drawer slides that were broken. We found that Whirlpool had issued an updated version of the top drawer rollers to address this common failure point. The Problem The customer reported that the top sliding drawer slides were broken on their Kenmore dishwasher. The … Read more
A KitchenAid dishwasher in Akron wasn’t working at all. The homeowner ran a diagnostic and suspected a water supply problem with the pump or another component. Our diagnosis revealed the control board had failed and wasn’t sending power to the water valve. The Problem The customer reported the dishwasher was not working. After running a … Read more
A Canton homeowner called when their Maytag dishwasher went completely dark. The display won’t light up and the dishwasher does not turn on, even after attempting to flip the breaker with no change. The Problem The customer reported that the display won’t light up and the dishwasher does not turn on. They had already attempted … Read more
A Samsung dishwasher on Darlington Avenue NW in Canton, OH wasn’t working and displayed code LC. Our diagnostic revealed the dishwasher tub had several screws through it and was leaking at that spot. The Problem The customer reported their dishwasher was not working and showing code LC on the display. The LC error code on … Read more
A North Canton homeowner called about a Whirlpool dishwasher that wasn’t installed properly and was tipping forward out of its place. The unit needed to be fastened and screwed in properly to prevent the dangerous forward tipping. The Problem The dishwasher wasn’t installed properly and was tipping forward out of its place. This created a … Read more
We serviced an Admiral dishwasher in Louisville that wouldn’t drain all the way, ran cycles for 2 hours, and had door dripping issues. All three problems started simultaneously, pointing to seal and drainage component failures. The Problem The customer reported their dishwasher won’t drain all the way, cycle runs for 2 hrs, and door drips. … Read more
We responded to a call in North Canton about an Admiral dishwasher where the customer could hear dripping in the basement before the dishwasher while it was running. Upon inspection, we found it was dry under the dishwasher. The Problem The customer reported hearing dripping in the basement before the dishwasher while it was running. … Read more
A Canton homeowner called when a part on the left side broke off of the top rack making it inoperable to slide in & out. The dishwasher still ran, but loading dishes became impossible with a stuck top rack. The Problem A part on the left side broke off of the top rack making it … Read more