Tappan Oven Repair (Model 12-2299-10/06) – North Canton, OH
The oven failed to ignite, causing no preheating. Replacing the weak bake igniter resolved the issue.
The oven failed to ignite, causing no preheating. Replacing the weak bake igniter resolved the issue.
The GE washer was not spinning out properly, but after replacing the mode shifter coil, it now functions correctly.
The dryer was running but not heating, which was resolved by replacing the faulty heating element.
A customer on Laurel Green Drive Northeast in North Canton called with a familiar problem — their Whirlpool refrigerator had stopped working again with the same control panel issue affecting the middle drawer. They’d already tried unplugging it for 10 minutes with no success. The Problem The refrigerator stopped working again last night. The customer … Read more
The washer displayed an F5 error code, indicating a lid switch issue, which was resolved by replacing the lid switch.
The top drawer of the dishwasher was broken and wouldn’t stay in place. The upper drawer assembly was repaired using an updated slide kit.
A Samsung dryer at a North Canton home was squeaking from rollers, with the rear roller being the worst offender. Our technician found worn support components that needed replacement to restore quiet operation. The Problem The customer reported squeaking from rollers, with the rear roller producing the worst noise. This type of squeaking typically indicates … Read more
A Frigidaire dishwasher in North Canton wasn’t latching properly, with the door failing to secure mid-cycle. The customer suspected the latch mechanism was broken, but our diagnosis revealed a different root cause entirely. The Problem The door will not latch. From what I can tell, the latch isn’t just stuck I believe it is broken. … Read more
The French doors of the refrigerator were not closing completely, and the outside water dispenser was not functioning. Replacing the door switch resolved the issue.
The washer displayed a flashing F5 error, indicating a lid switch issue. Replacing the lid switch resolved the problem.