We recently completed an oven repair in Elkton, Virginia for an Admiral JB850ST1SS that had a bad control board. The customer contacted us after their oven stopped responding properly, and our diagnosis confirmed the control board had failed and needed replacement. The Problem The customer reported a bad control board on their Admiral oven. The … Read more
We completed an oven repair in Homeworth, OH for a customer whose propane oven pilot light would not stay on even after cleaning the soot away from it and relighting it. The pilot light would last a few hours or a couple of days before going out again. Our diagnosis revealed a failed burner pilot … Read more
A Kenmore oven on Rosemont Road Southwest in Alliance, OH was displaying an F10 error code and wouldn’t heat. We diagnosed the problem as a failed control board and installed a replacement to restore normal operation. The Problem The customer reported an F10 error code appearing on their Kenmore oven, and the unit wouldn’t heat … Read more
A Maytag oven in Carrollton was leaking gas and had two surface burners not working properly. Our technician repaired the gas leak on the oven valve and provided a quote for one burner replacement. The Problem The customer reported their Maytag CRG8200AAW was leaking gas and had 2 surface burners not working properly. Gas leaks … Read more
We recently completed an oven repair in Canal Fulton for an Admiral gas range that was slow to ignite and making a loud “foomp” sound when it finally lit. The customer also reported smelling gas afterwards and having trouble with the left front burner ignition. The Problem The customer reported that the oven was slow … Read more
We completed an Admiral oven repair in Minerva, OH for a customer whose front burner was not regulating properly. Our diagnosis revealed a failed control switch that needed replacement. The Problem The customer reported that their front burner was not regulating. This meant the burner wasn’t maintaining consistent heat levels during cooking. Diagnosis Our inspection … Read more
A customer in Waynesburg called about their Admiral gas stove with top burners that light but an oven that does not heat up. The unit is 2 years old and the problem just started that night. We found a failed ignitor preventing the oven from heating properly. The Problem The customer reported that their gas … Read more
A GE Spectra oven in Carrollton, OH was taking almost 2 hours to reach temperature and not holding it properly. The customer also reported the displayed temperature didn’t match their oven thermometer by almost 50 degrees. We found a failed bake igniter was preventing proper heating cycles. The Problem The customer reported their oven was … Read more
A Samsung oven in Malvern wasn’t working after the homeowner switched from propane to natural gas. The stovetop was working but not the oven. We discovered the unit had been connected to 250 volts instead of 120, which burned up critical components. The Problem The customer had recently switched from propane to natural gas. The … Read more
A GE oven in North Canton was cutting out and resetting when trying to use the oven or broil function. The customer suspected a power issue or bad control board, and our diagnosis confirmed the main control had indeed failed. The Problem When you try to use the oven or broil it just cuts out … Read more