A Whirlpool dryer in Beloit, OH quit working completely. All the lights came on and it acted like it was going to work, but when the start button was pushed, the inside barrel wouldn’t move and go around. The culprit was a broken belt that had taken out several other components. The Problem The customer … Read more
A Whirlpool dryer in Canton, OH wasn’t closing properly due to a bent door. Our technician was able to adjust the door alignment to restore proper operation without replacing any parts. The Problem The customer reported that their dryer door is bent and doesn’t close properly. This prevented the dryer from operating since the door … Read more
A Canton homeowner called us when their Whirlpool refrigerator stopped cooling entirely — both the fridge and freezer sections were warm. They mentioned that lines were restricted and they’d already had another service company out who couldn’t complete the repair. Our diagnosis revealed a refrigerant leak that would require specialized equipment to fix. The Problem … Read more
A Whirlpool dryer in Canton wasn’t starting, though the customer could hear the timer turning. We found loose screws on the door switch that needed tightening to restore proper operation. The Problem The customer reported their dryer won’t start. They could hear the timer turning, indicating the control was receiving power, but the unit wouldn’t … Read more
A Whirlpool oven on Knox-School Road in Alliance needed a new front door seal. The existing gasket had failed, compromising the oven’s ability to maintain proper temperature and seal during operation. The Problem The customer reported an issue with the front door seal on their Whirlpool oven. A damaged or worn door gasket affects the … Read more
A Canton homeowner called us about a Whirlpool range that had multiple burners not working and a difficult oven door. Upon inspection, we found the stove had the wrong burner installed and was beyond economical repair. The Problem The customer explained that the stove didn’t look good in condition when they got the apartment and … Read more
A Whirlpool washer in Canton was displaying two error codes — F51 and DL — and wouldn’t clear even after unplugging and resetting. The rotor on the bottom of the washer had come loose, causing the OL error code. The Problem The customer reported two codes appearing on their Whirlpool washer: F51 and DL. They … Read more
A Whirlpool washer in Louisville wasn’t starting consistently, requiring the owner to wait and try again before it would run. Our diagnosis revealed dirty water inlet screens were likely causing intermittent flow issues that prevented reliable startup. The Problem The customer reported that the washer won’t always start, but if they wait a while and … Read more
A Whirlpool oven in Alliance, OH was experiencing multiple control issues after a power outage during new electric meter installation. The heating elements would shut off after just a minute or two, the fan wouldn’t turn off, and the unit couldn’t reach temperature despite the control panel functions working normally. The Problem After power outage … Read more
A Canton homeowner called when their Whirlpool dryer would not heat. We diagnosed failed heating components and restored full drying performance with replacement parts. The Problem The customer reported that their dryer will not heat. The unit would run through cycles but clothes came out damp and cold. Diagnosis Our testing revealed that both the … Read more