Samuel Willhite We returned to a Thermador microwave on Glenmoor Road Northwest in Canton, OH for a follow-up service call. The microwave was displaying original symptoms again after our previous repair attempt. Rather than continue with additional work, we decided to refund the customer’s payment. The Problem The microwave was displaying original symptoms again following our earlier … Read more
A Samsung VRT washer in Alliance, OH was displaying a DC error code and refusing to complete its spin cycle. The machine would start to spin water out, then start beeping and flashing “DC” on the display before recycling and filling with water again. This turned out to be a model covered by Samsung’s recall … Read more
A customer in Minerva called about their GE dryer that only runs while pushing start button. We diagnosed the issue as a failed belt tension switch and got the dryer running normally again. The Problem The customer reported their GE dryer only runs while pushing start button. This meant the dryer would stop immediately when … Read more
A Maytag dryer in Akron wasn’t producing any heat despite the customer’s previous repair attempts. We found the ignitor had power but wasn’t glowing, preventing the gas valve from opening and the burner from lighting. The Problem The customer reported no heat from their Maytag dryer. They had already replaced the thermal fuse and coil … Read more
A Canton homeowner called because their Maytag Centennial washer won’t sense there’s a load and doesn’t do anything. We diagnosed multiple system failures that made replacement the better choice than repair. The Problem The customer reported their washer won’t sense there’s a load and doesn’t do anything when they try to start a cycle. Diagnosis … Read more
A Canton homeowner called us about a gas leak inside their Thermador range top. The gas company had already identified the area where it was leaking, but were unable to further investigate without taking apart the range top. The Problem There is a gas leak inside the range top. The gas company was already out … Read more
A customer in Tallmadge called about their Maytag washer that won’t start. When we arrived at the Beechwood Drive location, we found the issue wasn’t with the washer at all — the GFCI outlet was tripped. The Problem The customer reported their Maytag washer won’t start. Both the washer and dryer were completely unresponsive. Diagnosis … Read more
A homeowner in North Lawrence, OH called us about their Whirlpool dishwasher that had water not draining out. When we arrived at the Sousa Street home, we discovered the drain line was plugged with a piece of plastic that was blocking proper drainage. The Problem The customer reported that water was not draining out of … Read more
We serviced multiple commercial washers at Peacock Laundromat in Carrollton, OH, addressing jammed coin mechanisms and a faulty drain valve. The repair involved clearing coin jams on two machines and installing a new drain valve in a Dexter washer. The Problem One Dexter washer needs drain valve, one Dexter needs coin mech unjammed, one Huebsch … Read more
A Samsung refrigerator in North Canton wasn’t closing properly due to a broken flipper assembly spring. The left door wouldn’t seal, letting cold air escape and forcing the compressor to work overtime. The Problem The refrigerator flipper assembly spring broke and now my left door won’t close properly. This spring mechanism helps the French door … Read more