An Admiral oven on Crestdale Street Northeast in Canton, OH had stopped working properly. The customer reported that for a few years only the convection bake option would work, but often times temp would fluctuate and burn, and now all of the bake options will not heat up with only the broil function working. The … Read more
A customer in Sherrodsville, OH contacted us because their Admiral oven needed a new bake element. We diagnosed the issue and provided the replacement part with installation support. The Problem The customer reported their Admiral oven needs oven bake element. The existing heating element had failed and required replacement to restore proper baking function. Diagnosis … Read more
A Canton homeowner called about their Admiral dishwasher with a handle that had come loose. We found the screws had backed out of the handle assembly and secured them properly with thread-locking compound. The Problem The customer reported the handle is loose on their Admiral dishwasher. This made opening and closing the dishwasher door difficult … Read more
A commercial laundry facility in Louisville called us about multiple equipment failures affecting their operation. The Dexter stack dryer number 1 wasn’t heating again after a previous repair, and a Wascomat unit with an out-of-order tag kept running after our last visit and was stuck during the cycle and wouldn’t shut off. The Problem The … Read more
We received a service call in Magnolia, OH for an Admiral freezer that stopped running. Our diagnosis revealed the cord control thermostat had failed, preventing the unit from operating. The Problem The customer reported their Admiral freezer stopped running completely. The unit was not maintaining temperature and showed no signs of operation. Diagnosis Upon inspection, … Read more
The dryer was spinning but not heating, causing inconvenience. We replaced the heating element for a complete fix.
The dishwasher failed to start despite having power. The control board was replaced to restore functionality.
The refrigerator wasn’t cooling properly, with the bottom drawer icy and the rest warm. Replacing the evaporator fan resolved the issue.
The self-cleaning cycle failed to engage due to a faulty door lock, which was replaced to restore functionality.
The oven coil was not working, but after replacing the burned-out bake element, it now operates normally.