A GE washer at a home on Cumberland Rd SW in Sherrodsville, OH had stopped working entirely, leaving the customer with no response from the unit. Samuel visited the home, found the user interface unresponsive despite DC power being present, and replaced the UI board. After updating the software through SmartHQ, the washer tested good … Read more
Samuel recently made a service call to a home on Roswell Rd SW in Sherrodsville, OH, where the owner of a Monogram 48-inch built-in refrigerator, model ZIS480NNII, was dealing with lights going out on the fresh food side. The left-hand light tower in the fresh food compartment had stopped working, traced to a failed LED … Read more
The washer’s light illuminated, but it failed to start filling with water. Replacing the door switch resolved the issue.
The dryer failed to turn on, but after replacing the thermal fuse and heating element, it was restored to full functionality.
A customer in Sherrodsville, OH contacted us because their Admiral oven needed a new bake element. We diagnosed the issue and provided the replacement part with installation support. The Problem The customer reported their Admiral oven needs oven bake element. The existing heating element had failed and required replacement to restore proper baking function. Diagnosis … Read more
A Westinghouse dryer on West Lakeside Drive in Sherrodsville, OH was running but wouldn’t heat up. The customer had already cleaned out the unit and verified the exhaust wasn’t plugged. What we found was an unusual flame sensor failure that required complete disassembly to diagnose. The Problem The customer reported that the dryer runs but … Read more
A customer in Sherrodsville called about their Admiral washer and dryer set having multiple issues. The dryer sounded like it was falling apart, while the washer wouldn’t spin out and wasn’t draining properly. Our diagnosis revealed two separate problems that needed attention. The Problem The customer reported that their dryer sounded like it was falling … Read more
A GE washer in Sherrodsville wasn’t cycling properly, so we headed out to diagnose the issue. What we found was a combination of a dirty cold water screen and a transmission leaking oil. The Problem The customer reported their GE washer was not cycling properly. The machine wasn’t completing its wash cycles as expected. Diagnosis … Read more
A customer in Sherrodsville called about their Kenmore washer that wasn’t responding to any controls. The washer did nothing when you push, pull or twist the knob, while their dryer operated fine. Our diagnosis revealed a failed timer that needed replacement. The Problem The customer reported that their washer does nothing when you push, pull … Read more
A Kenmore washer at 8371 Walnut Street Southwest in Sherrodsville was leaking water underneath. The homeowner reported the water leaks underneath, and our diagnosis revealed an intermittent leak that appeared in two spots under the washer after it had been spinning for a while. The Problem The customer called because the water leaks underneath their … Read more