A Whirlpool washer on Jonathan Avenue in Akron wasn’t spinning properly. The customer wasn’t sure if the machine didn’t spin at all or just during the dry cycle. We found a failed hub that needed replacement. The Problem The customer reported that the machine doesn’t spin, though they weren’t certain if it failed to spin … Read more
A GE dryer in Akron was taking longer to dry than it should, with the customer suspecting a lint clog between the lint tray area and where they could reach to vacuum out when removing the tubing off the back. Our diagnosis revealed the issue was indeed related to ventilation, requiring a thorough cleaning and … Read more
A Kenmore top load washer in Akron wasn’t completing its cycle properly. The customer reported it would fill and wash but wouldn’t drain or spin. Our diagnosis confirmed a failed lid switch was preventing the spin and drain functions from operating. The Problem The customer called because their Kenmore washer would fill and wash but … Read more
We responded to a service call in Akron for a Samsung washer that water will not spin out. When we arrived and tested the unit, the washer was working correctly at time of service. The Problem The customer reported that water will not spin out from their Samsung top-load washer. This is typically a frustrating … Read more
A Whirlpool washer in Akron wasn’t spinning clothes despite the motor turning on. We found a failed timer that was causing the motor and capacitor to overheat, preventing proper drum operation. The Problem The customer reported that the motor turns on, but the drum is not spinning. This left clothes sitting in water without the … Read more
Our team responded to an Akron service call for an LG front-load washer with a bad water leak from the front of the drum area. Upon inspection, we found a dispenser overflow causing the leak and requiring housing and screen replacement. The Problem The customer reported a bad water leak from front of washer drum … Read more
A Samsung dryer in Akron started making loud squeaking noises while running, then made a loud “clunk” and wouldn’t start operating again. The customer suspected it needed a new belt, but our diagnosis revealed the idler pulley had failed instead. The Problem The dryer started making loud squeaking noises while running. While drying, it made … Read more
A customer in Akron called about two appliances under a new home warranty — a Whirlpool refrigerator with a warm rubber piece between the stainless exterior and interior, and a dishwasher with questionable functionality. Our inspection revealed major issues with both units that required immediate attention. The Problem The refrigerator’s rubber piece between the outside … Read more
A Whirlpool Cabrio washer in Akron stopped mid-cycle and displayed error code F7 E6. The machine would turn off and on but wouldn’t finish the cycle or start a new one. We found a stuck actuator that needed replacement. The Problem The customer reported that the washer stopped mid cycle and displayed error code F7 … Read more