Whirlpool Dryer Repair (Model TEDX640JQ1) – Louisville, OH
Dryer heated but the drum would not turn. A broken drive belt was replaced, and the unit now tumbles and dries properly.
Dryer heated but the drum would not turn. A broken drive belt was replaced, and the unit now tumbles and dries properly.
Dryer squeaked during operation. Worn front bearing slides and drum bearing; replaced slides, bearing, and belt to restore quiet, smooth tumbling.
Frigidaire dryer in Louisville wouldn’t start because the door wouldn’t latch. Replaced the broken latch to restore safe closure and normal operation.
Dryer failed to start due to a broken belt. Replaced the belt, pulley, and roller kit to restore normal operation.
The heating element failed. Replaced the heater assembly (with high-limit and cycling thermostats) and serviced the rollers, restoring proper heat and cycling.
Dryer ran continuously after cycles due to a stuck relay on the control board. Replaced the control board and door switch to restore proper shutoff.
Dryer would not start due to an open thermal fuse. Replaced the fuse; unit now starts and runs properly.
We responded to a service call in East Canton for a Samsung dryer that wouldn’t operate. The customer reported their dryer was completely dead, but our diagnosis revealed the unit had overheated due to a lint-covered thermistor, which caused the thermal fuse to blow. The Problem The customer’s Samsung DV350AEW/XAA dryer won’t operate. The unit … Read more
A Hartville customer called about their GE dryer GTDP180GD0WW that wouldn’t heat after another repair company quoted over $600 and claimed a wiring harness wasn’t available. Our inspection revealed an open igniter, cracked drive belt, and failed gas valve coils — all repairable with standard parts. The Problem The customer reported no heat whatsoever from … Read more
We received a service call in Canton, Ohio for an LG dryer that would not heat. The customer reported their dryer was running but producing no heat. Upon inspection, we found the fuse in the panel had blown. The Problem The customer’s LG dryer was running through its cycles normally but failing to produce any … Read more