A North Canton customer called when their Frigidaire microwave quit working and was running continuously when the door was shut. After diagnosing the FFMV164LSA, we determined a replacement was the best solution and installed a new Whirlpool microwave. The Problem The customer reported their microwave quit working and it runs continuously when the door is … Read more
A Frigidaire Dryer GLEQ2152ES0 in Alliance, OH was shutting down after a few minutes with flashing lights and an ‘Ad’ message. Replacing the heating element assembly, bearing kit, belt, and idler pulley restored normal operation.
The front-left burner stopped heating due to a corroded wire lead. We installed a new element and repaired the connection.
A Frigidaire refrigerator in Uniontown needed a new seal on the freezer. We found the freezer gasket had failed and was no longer sealing properly. Samuel Willhite replaced the worn gasket with a new factory part to restore proper sealing. The Problem The customer reported that their Frigidaire refrigerator needs a new seal on the … Read more
Range igniter clicked continuously even with gas off. Replacing the igniter switch wire harness resolved the constant sparking.
A Frigidaire dishwasher in Massillon was turning on but wouldn’t complete a cycle. The unit was displaying an i20 error code, which led us to discover a faulty water pressure sensor that required replacement following Frigidaire’s service bulletin. The Problem The customer reported that their dishwasher turns on but will not complete a cycle. The … Read more
A Canton homeowner called about their Frigidaire refrigerator not cooling with no lights working. We found multiple issues causing the unit to fail — a missing condenser coil fan cover, faulty cold control thermostat, and burned out lightbulbs. The Problem The customer reported their refrigerator was not cooling and had no lights. The unit wasn’t … Read more
A Frigidaire refrigerator in Akron had an ice maker evaporator frozen issue that turned out to be an installation problem. The customer had owned the refrigerator for just a short time and the ice maker wasn’t working. Upon examination, we found that an air handler kit had been installed previously but done incorrectly. The Problem … Read more
The refrigerator’s ice maker stopped producing due to a stripped mechanism mid cycle. We replaced the ice maker assembly to restore ice production.
Oven would not heat while burners worked. Diagnosed a weak bake igniter and replaced it; the oven now heats and preheats normally.