A customer in North Canton called about their Kenmore washer tripping the breaker, mostly on spin cycle. When we arrived at the Lorrell Avenue Southwest location, we found the timer was causing the electrical issue and replaced it to restore normal operation. The Problem The washer was tripping the breaker during operation. The problem occurred … Read more
A customer in North Canton called about their Kenmore Elite washer reporting something seems loose and the spin cycle not working correctly. Upon inspection, we found the wash tub is broken and not available for replacement. The Problem The customer reported something seems loose and the spin cycle not working correctly on their Kenmore Elite … Read more
A commercial Kenmore washer repair in Alliance brought us to a busy nail salon where the front-load machine wouldn’t start. The door wouldn’t latch properly, and pressing start only produced humming and buzzing sounds. We found the door lock latch assembly had completely failed. The Problem The customer needed a service call on their front … Read more
A Kenmore oven in North Canton had two problems: the left front burner wasn’t working and the broiler wouldn’t ignite despite the ignitor glowing. We found the issue was in the harness with surface igniter switches, which needed complete replacement. The Problem The customer reported issues with the left front burner, the small burner. The … Read more
The dryer was not turning on, but after repairing a cracked solder joint on the control board, it now functions properly.
The washer wouldn’t agitate or spin properly, likely due to a stripped gear. Replacing the hall sensor resolved the issue.
The homeowner reported that both the washer and dryer were not functioning. The issue was resolved by clearing a sock from the washer’s drain pump.
The washer was reported out of order but is now functioning after a service door lock replacement.
The refrigerator was not cooling properly, leading to spoiled food. The issue was resolved by repairing the cooling system.
The refrigerator was not cooling properly in the fresh food compartment due to frost buildup, likely from a circulation or defrost issue.