LG Washer Repair (Model WM3470HVA) – Canton, OH
The washer failed to power on, but after replacing the main control board, it was restored to full functionality.
lg
LG Washer Repair (Model WM4370HWA) – Canal Fulton, OH
The washer was not draining properly, and the issue was resolved by replacing the drain pump.
LG Washer Repair (Model WM3670HVA) – Louisville, OH
The washer displayed an ‘OE’ error and failed to drain properly. Replacing the drain pump resolved the issue.
LG Washer Repair (Model WM3470HWA) – Massillon, OH
The front gasket of the washer failed, leading to leaks. A new rubber gasket was installed to resolve the issue.
LG Washer Repair – CANTON, OH (WM4270HVA)
We completed a washer repair on Stream Ave NE in Canton, OH for a customer whose LG washer wasn’t draining and would fault out at the spin cycle. Our diagnosis revealed a failed drain pump that needed replacement. The Problem The customer reported their washer not draining and faulting out at spin cycle. The unit … Read more
LG Washer Repair – Massillon, OH (WT4970CW)
A customer in Massillon called about their LG washer that wouldn’t spin out and was showing UE and OE error codes. This turned out to be a common programming issue with LG front load washers that required a control board replacement. The Problem The customer reported that their washer won’t spin out and was displaying … Read more
LG Washer Repair (Model WM3470HWA) – Carrollton, OH
The washer failed to pump out water and spin, but after replacing the drain pump and main bearings, it now operates normally.
LG Washer Repair (Model WT4801CW) – Hartville, OH
The washer was making a grinding noise during cycles, which was resolved by replacing the bearing housing assembly.
LG Washer Repair (Model WM2501HWA) – Canton, OH
The washer displayed an OE error and failed to drain, preventing it from completing cycles. The water pump was replaced to resolve the issue.
LG Washer Repair – Canton, OH (WM3570HVA)
We responded to a service call in Canton for an LG washer displaying an OE error code and refusing to drain. The customer’s WM3570HVA had completely stopped pumping water out during the drain cycle, leaving clothes soaking wet at the end of every wash. The Problem The customer reported an OE error code and that … Read more