A Samsung gas oven in Minerva wasn’t heating at all, with the customer reporting no sounds when turning it on. Our diagnosis revealed a failed oven ignitor that needed replacement to restore normal operation. The Problem The oven would not warm up at all. When turned on, there were no sounds of anything kicking on. … Read more
A Canton homeowner called about their vintage Admiral gas stove — the pilot light on the left side wouldn’t stay lit. When we arrived at this late 1950s range, we found decades of buildup affecting the pilot system. The Problem The gas pilot would not stay lit on the left side of the stove. This … Read more
We responded to a service call in Akron for an old Sun ray gas oven that won’t heat. Upon inspection, we found a bad thermostat, but the age of this unit presents some challenging realities for repair versus replacement. The Problem The customer reported their Sun ray gas oven won’t heat. This is a common … Read more
We responded to a service call in Massillon, OH for an Admiral oven displaying F1 and F3 error codes. The stove was not functional, and our diagnosis revealed issues with both the control board and temperature probe. The Problem The customer reported F1 and F3 error codes appearing on their Admiral oven. The stove was … Read more
A Frigidaire oven in Carrollton needed adjustment service. The customer reported the oven needed to be adjusted and we found the air shutter required calibration. The Problem The customer called requesting oven adjustment service for their Frigidaire FGF68GMR unit. Diagnosis Upon inspection, we determined the oven’s air shutter needed adjustment to restore proper operation. The … Read more
We received a service call for a Frigidaire wall oven on Middlebranch Ave NE in Canton, OH. The customer reported that their wall oven was not closing properly. What we discovered was a parts availability issue that ultimately led to a replacement recommendation. The Problem The customer contacted us because their Frigidaire wall oven was … Read more
We responded to a service call in Canton, OH for a GE oven displaying F2 and F3 error codes. After diagnosing the unit, we found the control board had failed and was no longer available for replacement. The Problem The customer at Independent Pathways reported their GE oven was displaying F2 and F3 error codes. … Read more
We received a service call from a homeowner in Minerva, OH whose Admiral oven won’t light. Upon inspection, we found the pilot light had simply gone out — a common issue with gas ovens that requires proper relighting technique. The Problem The customer reported their oven won’t light. This prevented them from using their gas … Read more
We serviced a GE oven/stove at 389 Sherman St in Akron, OH where the customer reported that three eyes on the stove doesn’t work. What we found was a simple installation issue rather than failed components. The Problem The customer contacted us about three burners on their GE stove that weren’t working. This was affecting … Read more
A Whirlpool oven in Malvern needed door reassembly work. The customer contacted us for professional service to get their oven door properly put back together. The Problem The customer reported their Whirlpool oven needs door reassembled. The oven door components required professional reassembly to restore proper function. Diagnosis Upon inspection, we found the oven door … Read more