A Samsung top-load washer on Easton St NE in Louisville, OH had been throwing off-balance loads for roughly a year. Samuel visited the home, diagnosed the issue, and rebuilt the shock absorbers to get the machine running smoothly again. The Problem Top-load washer goes off-balance easily (~1 yr). The Repair Rebuilt shock absorbers with Bounce-B-Gone. … Read more
A Samsung top-load washer in Canton, OH was stopping mid-cycle and throwing an ND error, leaving clothes sitting in standing water. Samuel found a sock lodged in the drain pump housing, cleared the obstruction, and confirmed the washer was draining and spinning fully before leaving the job. The Problem Washer not draining, fills with water, … Read more
A Samsung washer in Louisville, OH was leaking water from the bottom of the door. Samuel found the culprit was hair and grime buildup on the door glass where it contacts the door boot. After a thorough cleaning, the washer sealed properly and no parts were needed. The Problem Water leaking from the bottom of … Read more
On a service call to Kings Arms Circle NW in Uniontown, OH, Samuel Willhite diagnosed a Samsung washer that kept cycling water back into the basin instead of spinning dry. The culprit turned out to be failing shock absorbers. After a repair quote was provided, the customer’s home warranty company opted to purchase a new … Read more
Louisville Appliance Repair recently completed a service call in Canton, OH, on Windgate Ave NE, for a Samsung WF45N5300AV/US washer the customer believed was failing to drain and showing an SC error code. Samuel inspected the unit at the customer’s home and found the actual error code was SD, with the washer draining but presenting … Read more
A Samsung washer at a home on Radford St NW in North Canton, OH had stopped spinning and was failing to drain water. Samuel arrived to find the main unit of this dual-washer system full of water, and after verifying the drain hose was clear, he replaced the drain pump to resolve the issue. The … Read more
Louisville Appliance Repair recently completed a service call on McIntosh Drive Northeast in Louisville, Ohio, where a Samsung washer was tripping the circuit breaker during its cycle. Samuel visited the home to diagnose the issue and determined the problem was related to an arc fault breaker. The customer was advised to replace the breaker to … Read more
When a Samsung washer at a home on Rowland Avenue Northeast in Canton, OH developed a pulled-out dial, the owner reached out to Louisville Appliance Repair for an in-home visit. Samuel arrived on April 8, 2021 to assess the situation. After the appointment, the customer decided to replace the unit rather than proceed with the … Read more
A Samsung washer at a home on Candlewood Avenue Northwest in North Canton, Ohio developed a burning smell following the spin cycle, prompting the homeowner to schedule an in-home visit with Louisville Appliance Repair. Samuel assessed the WF331ANR/XAA on site and determined the machine needed a new spider and back tub assembly. Unfortunately, those parts … Read more
A Samsung washer at a home on Maxine Ave NE in Canton, OH was leaving laundry sitting in water, failing to rinse or spin when the lid was opened, and producing a burnt wire smell. Samuel visited the home and found that the drain pump had failed, replacing it with a new AC pump motor. … Read more