A customer in Akron called about their GE gas range having numbers wearing off and knob dials not correlating with flame strength. We also found their garbage disposal wouldn’t turn on during our visit. The Problem The homeowner reported that numbers were wearing odd on the range and the knob dials weren’t correlating with the … Read more
We responded to a Canton home where an Admiral stove had stopped heating properly. The customer reported that both baking and broil elements wouldn’t heat, leaving them without a working oven. Our diagnosis revealed a failed clock/control board that needed replacement. The Problem The homeowner contacted us because their baking and broil elements won’t heat. … Read more
We received a service call in Massillon, OH for an LG stove that wasn’t heating properly. The customer’s oven had stopped working, and our diagnosis revealed multiple electrical issues preventing proper operation. The Problem The customer reported their oven was not heating properly. The unit would turn on but failed to reach the set temperature, … Read more
We returned to a Canton home where we’d previously repaired a refrigerator to address multiple appliance issues. The homeowner reported that the elements on their glass countertop stove were running too hot even on low settings, the washer was getting unbalanced on every load, and there were also dishwasher problems that needed attention. The Problem … Read more
A Canton homeowner called after accidentally spilling a cup of coffee on their Maytag stove top. The unit immediately tripped the breaker when plugged in, with sparks and smoke coming from the back knob. We found coffee damage to the ignition switch assembly that required complete replacement. The Problem The customer reported that a cup … Read more
A KitchenAid stove in Hartville was giving its owner headaches with inconsistent oven heating. Sometimes it worked fine, other times it wouldn’t heat at all. We found the heat relay had developed cracks in the solder joints, causing the intermittent connection problems. The Problem The customer reported their oven heats sometimes, other times does not. … Read more
A Frigidaire stove on Noble Street in Alliance wasn’t cooperating with several burners that wouldn’t light and an oven that refused to work. Our diagnosis revealed a mix of cleaning needs and a failed igniter that required replacement to get this kitchen back in service. The Problem The customer reported that several burners weren’t lighting … Read more
A Louisville homeowner called about their Frigidaire stove giving off fumes that caused headaches and could be smelled when coming back inside. Upon entering the house, we could smell a strong lacquer smell that pointed to a different source than the appliance itself. The Problem The customer reported that using the stove gives off a … Read more
The stove displayed an F11 error code and limited button functionality. Replacing the main control board resolved the issue.
We received a call from a customer in Canton, OH whose Admiral stove wouldn’t heat up. Our lead technician Samuel Willhite diagnosed the problem as a failed igniter and completed the repair with a factory replacement part. The Problem The customer reported that their Admiral stove won’t heat up. This is a common symptom when … Read more