Whirlpool Dryer Repair (Model WED4900XW0) – Salem, OH
Dryer squeaked and rumbled due to worn support rollers and idler pulley. Installed Whirlpool kit with new rollers, idler, and belt to restore quiet operation.
Dryer squeaked and rumbled due to worn support rollers and idler pulley. Installed Whirlpool kit with new rollers, idler, and belt to restore quiet operation.
The dryer ran but produced no heat due to an open igniter. Replacing the igniter restored proper heating.
Noisy operation traced to worn idler pulley and support roller. Replaced pulley and one roller and cleaned lint to restore smooth, quiet drying.
This Whirlpool dryer wasn’t drying due to a failed timer causing intermittent heat. Replacing the timer restored consistent heat and normal drying.
The gas oven would not light due to a failed igniter. Replacing the oven igniter restored quick ignition and even heating.
Dryer squeaked and underheated due to an open heating element and worn drum bearing. Replaced element and bearing kit to restore heat and quiet operation.
The oven heated unevenly due to weak igniters. Replaced the main oven burner igniters; ignition now in ~45 seconds and preheat in about 8 minutes.
The Whirlpool dryer was set up for natural gas while the home uses propane. We installed an LP conversion kit and calibrated burner settings for safe, efficient heat.
The oven on this Frigidaire range wouldn’t heat due to a failed bake element. We confirmed 240V and replaced the element to restore baking.
Dryer ran and heated but made belt-slip noise. Failed idler pulley replaced and tested; unit operates quietly and normally.