A Canton homeowner contacted us about their Whirlpool dishwasher with lights that keep flashing. They had researched the problem and tried resetting the unit, even turning off power to it, but nothing worked and now the dishwasher won’t even run. The Problem The customer reported that lights keep flashing on their dishwasher. They had researched … Read more
A Whirlpool dryer in Canton was making a screeching sound when running. We found the idler pulley for the belt had failed and replaced it to restore quiet operation. The Problem The customer reported their dryer makes a screeching sound when running. The noise was loud enough to be heard throughout the house during operation. … Read more
We responded to a service call in North Canton for a Whirlpool gas range where one of the burners was igniting whenever any of the other burners were turned on, and it wouldn’t turn off completely either. The problem turned out to be a stripped control knob that wasn’t allowing proper shutoff. The Problem The … Read more
A Whirlpool dryer on Bentler Avenue Northeast in Canton was making loud noise during operation. Our technician found a failed idler pulley and worn drum belt causing the noise issue. The Problem The customer reported loud noise during dryer operation. The unit was still running but creating disruptive sounds that indicated internal component failure. Diagnosis … Read more
A Whirlpool dryer in North Canton stopped spinning but was still getting hot. The customer believed the belt had stopped working. Our diagnosis revealed the idler pulley had failed, causing the belt to come off and break. The Problem The dryer does not spin, but still gets hot. The customer believed the belt on the … Read more
A homeowner in Massillon called about their Whirlpool dryer that will not turn on. The unit began needing to be restarted 3-4 times to dry a load and now will not start at all, despite being only 1.5 years old. The Problem The customer reported their dryer will not turn on. It began needing to … Read more
A Whirlpool dryer on East Line Street in Minerva, OH kept fraying belts around a pulley despite the homeowner replacing the drum belt twice. The original belt had snapped, and subsequent replacements continued to fray in the same spot, pointing to a worn idler pulley causing the damage. The Problem The customer had replaced the … Read more
A Whirlpool washer in Carrollton, OH would not go past spin cycle. The customer reported the machine was getting stuck at this stage of the wash process. Our diagnosis revealed a lid lock error that was preventing normal operation. The Problem The Whirlpool washer will not go past spin cycle. The machine was stopping at … Read more
A Whirlpool dishwasher on Ray Avenue in Carrollton was leaking water from underneath across the floor. Our diagnosis revealed the upper spray arm was caught and spraying on the door seal, with both upper and lower spray arms split and damaged. The Problem The customer reported their Whirlpool dishwasher leaking water from underneath across floor. … Read more
A Whirlpool washer in Navarre, OH had a blinking lock light and wouldn’t start because it wouldn’t lock properly. We found the lid latch had failed and replaced it to restore normal operation. The Problem The customer reported their Whirlpool washer had a blinking lock light and the washer wouldn’t lock, preventing it from starting. … Read more