A Whirlpool dishwasher on Maplegrove Street in Louisville wouldn’t latch properly and refused to start. The customer was convinced the door latch had failed, but when I pulled the unit out to check the mechanism, I found the real problem was much simpler — a loose mounting screw had thrown off the door alignment. The … Read more
A Whirlpool refrigerator in Carrollton, OH wasn’t cooling and had a blinking display panel. We found the high voltage control board had failed, likely from a power surge or unsteady voltage. The Problem The customer reported no cooling, and the display panel was blinking. The refrigerator wasn’t maintaining proper temperatures despite running. Diagnosis We identified … Read more
A Whirlpool washer on Graham Drive in Louisville was only cycling to the wash but would not spin or rinse, staying stuck at those cycles. The customer had tried a factory reset which worked temporarily before the problem returned. Our diagnosis revealed a failing main control board throwing an F3E2 power error. The Problem The … Read more
A Whirlpool dryer in Louisville wasn’t shutting off and had no heat, leaving clothes damp after hours of running. The customer also reported the door handle had broken off completely. Our diagnosis revealed the real culprit was simpler than expected. The Problem The customer called because their dryer runs but timer doesn’t work dryer doesn’t … Read more
A Whirlpool dryer in North Canton wasn’t heating, leaving clothes damp after full cycles. Our diagnosis revealed a failed heating element that needed replacement to restore normal operation. The Problem The customer reported their dryer was not heating. Clothes were coming out damp and cold even after running complete dry cycles. Diagnosis Testing confirmed the … Read more
A Whirlpool refrigerator on Northlawn Avenue NE in Louisville had a display that wouldn’t light up unless pushing buttons. We diagnosed the issue and replaced the main control board to restore normal operation. The Problem The customer reported that the display won’t light up unless pushing buttons. The refrigerator’s control panel remained dark during normal … Read more
A Whirlpool dryer on Smyth Avenue in Alliance, OH wouldn’t start — it powered on but wouldn’t spin. The customer had already diagnosed the issue and purchased a repair kit, knowing the belts were broken. The Problem The customer reported their dryer won’t start. It powers on but won’t spin, and they noted that belts … Read more
A Canton homeowner called when their Whirlpool range’s oven portion would not light, though the top burners worked fine. We found the oven ignitor had failed and was visibly burnt out. The Problem The oven portion of the range will not light. The top burners work fine… Just not the oven portion. Diagnosis The oven … Read more
A Whirlpool washer repair call in Canton brought us to a coin-operated unit making a humming noise with no indicator lights. The customer reported the agitator wasn’t moving, but our diagnosis revealed a different issue entirely. The Problem The washer was making a humming noise and it sounded like the agitator was not moving. No … Read more
A Whirlpool oven in Canton wasn’t heating correctly or holding accurate temperature. Our diagnosis revealed a failed bake element that needed replacement to restore proper heating function. The Problem The customer reported that the oven was not heating correctly nor holding any kind of accurate temperature. This type of heating issue typically points to a … Read more