Samuel made a service call to a home on Oakfield Street in East Canton, OH to look at a Whirlpool washer that had stalled on the sensing cycle and would not move forward. No parts were needed. After running the auto diagnostic cycle, the unit was washing normally before Samuel left, and a follow-up call … Read more
On a service call to Louisville, OH, Samuel Willhite diagnosed a Whirlpool washer that wouldn’t shut off after completing a cycle and had stopped finishing full wash cycles. The culprit was an F3E2 error code pointing to the main control board, which was replaced to restore normal operation. The Problem Whirlpool Washer Pump won’t shut … Read more
We serviced a Whirlpool washer on Hammond Avenue in Canton, OH that wouldn’t lock or start. The unit was displaying F5E2 lid lock fault and F2E1 stuck key codes, indicating it wasn’t sensing when the lid was locked. The Problem The customer reported their Whirlpool washer won’t lock or start. The machine was completely inoperable, … Read more
We responded to a service call in Uniontown for a Whirlpool washer that wasn’t working despite the customer’s attempts to unplug and recalibrate the unit. Our diagnosis revealed the machine was stuck in default drain mode with multiple error codes indicating a failed control board. The Problem The customer reported the washer was not working, … Read more
A Whirlpool washer on Graham Drive in Louisville was only cycling to the wash but would not spin or rinse, staying stuck at those cycles. The customer had tried a factory reset which worked temporarily before the problem returned. Our diagnosis revealed a failing main control board throwing an F3E2 power error. The Problem The … Read more
Washer wouldn’t power on despite a working outlet. A failed lid switch was replaced, restoring normal power and operation.