A Whirlpool washer in Hanoverton was leaking water, prompting a service call to diagnose the issue. Upon inspection, we found water splashing from between the detergent cup in the wash machine tub, with failing bearings adding to the unit’s problems. The Problem The customer reported water leaking from their Whirlpool washer. Water was visibly escaping … Read more
A Whirlpool Cabrio washer in Louisville, OH was stuck mid-cycle with water that wouldn’t drain. The homeowner called us when their machine displayed error codes and refused to complete any wash cycle. The Problem The customer reported that their washer does not complete wash cycle and water will not drain. The machine was displaying multiple … Read more
A Whirlpool washer service call in Hanoverton brought us to a unit with a broken agitator. Our diagnosis revealed the transmission had failed, leading the customer to decide on replacement rather than repair. The Problem The customer reported that the agitator is broke. This prevented the washer from properly cleaning clothes during the wash cycle. … Read more
A Whirlpool washer in Minerva had an agitator that wouldn’t spin. When we opened it up, we found the agitator was stripped and needed replacement. The Problem The customer reported that the agitator won’t spin. This left clothes poorly cleaned since the agitator provides the washing action that moves water and detergent through the load. … Read more
A Whirlpool refrigerator in Minerva wasn’t keeping the freezer cold while the main compartment worked normally. We diagnosed a weak cooling system, likely caused by a refrigerant leak that would make repair uneconomical. The Problem The customer reported their fridge was working normally, but the freezer section wasn’t maintaining proper temperature. This selective cooling failure … Read more
We got a call from North Canton about a Whirlpool dryer that would not turn on. When we arrived at the home on Willaman Avenue Northwest, our diagnosis revealed the start switch was bad and unavailable for replacement. The Problem The customer reported their dryer would not turn on. No matter what they tried, the … Read more
A Whirlpool washer in Minerva, Ohio stopped filling with water completely. The homeowner called us when their TAWS700EQ2 model wouldn’t start a wash cycle. We found the cold water valve had failed and wasn’t activating when signaled by the control board. The Problem The customer reported their washer won’t fill with water. The machine would … Read more
A Whirlpool refrigerator in Dover, OH was running warm despite showing correct temperatures on the front panel. The customer reported the fridge displaying 33 degrees but feeling more like 50 inside. Our diagnosis revealed a failed start device preventing the compressor from running properly. The Problem The customer called because their refrigerator was warm. The … Read more
A Whirlpool washer in North Canton wouldn’t start its cycle despite powering on normally. The unit displayed an F3 E2 inlet water temperature fault, pointing to a problem with the water temperature sensing system. The Problem The customer reported that their washer won’t start cycle. It powers on but won’t fill with cold water. The … Read more
A customer in East Canton called about their upright freezer not cooling. The Whirlpool unit had completely stopped maintaining temperature, leaving frozen foods at risk. The Problem The customer reported their upright freezer was not cooling. The unit had lost its ability to maintain freezing temperatures entirely. Diagnosis Testing revealed the control thermostat had failed. … Read more