GE Range Repair (Model JBP26WB4WW) – Canton, OH
Two surface burners on this GE range in Canton stopped heating due to failed elements and worn receptacles. Replaced both elements and burner plugs.
Two surface burners on this GE range in Canton stopped heating due to failed elements and worn receptacles. Replaced both elements and burner plugs.
The dryer’s heating element failed. Replacing the element restored proper heat and normal drying performance.
Range was non-responsive due to a failed control board. Replaced the board and verified normal heating.
Kenmore refrigerator’s ice maker would not produce ice while the water dispenser worked. Replaced the ice maker assembly; unit cycled and filled, restoring ice.
A Whirlpool dryer in Carrollton, OH was very noisy due to worn support rollers and an idler pulley. Replacing the rollers, idler, and belt restored quiet operation.
A failing drive motor caused loud noise and a burnt electrical odor. Replacing the drive motor restored smooth, quiet operation.
We completed a range repair on Meese Road NE in Louisville, OH for a customer whose Maytag range had a cracked display. The control panel was completely damaged and needed replacement to restore functionality. The Problem The customer reported that their display cracked. The control panel was no longer usable due to the physical damage … Read more
A Whirlpool range on Begonia Circle Northwest in Mogadore was shutting down with a “fan too low” error message shortly after the oven ignited. Our diagnosis revealed a failed cooking fan that wasn’t moving enough air to satisfy the unit’s safety sensors. The Problem The customer reported the oven would ignite and start heating but … Read more
A Whirlpool washer on Plain Center Avenue Northeast in Canton, OH was going from sensing to done without draining. We found a broken lower harness to the drain pump that was triggering an F8E1 error. The Problem The customer reported that their washer goes from sensing to done and will not drain. The cycle would … Read more
A Frigidaire refrigerator in Akron had an ice maker evaporator frozen issue that turned out to be an installation problem. The customer had owned the refrigerator for just a short time and the ice maker wasn’t working. Upon examination, we found that an air handler kit had been installed previously but done incorrectly. The Problem … Read more