Admiral Dryer Repair (Model GTDP490ED3WS) – Alliance, OH
The dryer drum wasn’t turning despite heat functioning. The issue was resolved by adjusting the tightener bracket.
The dryer drum wasn’t turning despite heat functioning. The issue was resolved by adjusting the tightener bracket.
The Whirlpool dryer was not heating, causing inconvenience for residents. After replacing the switch and motor, it is now running and heating properly.
The dryer was making loud squeaking noises, which were resolved by replacing the roller and idler pulley.
The dryer wasn’t heating properly due to a faulty heating element. After replacing the element assembly, it now heats and runs effectively.
The dryer emitted a gas smell and loud squealing when turned on. A support pulley was replaced to resolve the issue.
A coin-operated Whirlpool dryer in North Canton was intermittently failing to start with the push button unless the lever was manually actuated. Our diagnosis revealed a worn push tab on the coin slide that wasn’t properly connecting with the timer mechanism. The Problem The customer reported that their coin-operated dryer intermittently will not start with … Read more
A Maytag dryer in Dellroy wasn’t heating despite spinning normally. We found faulty gas valve components that were preventing proper ignition and flame detection. The Problem The customer reported that the dryer spins fine but doesn’t heat. This is a common issue with gas dryers where the motor and drum operation remain normal, but the … Read more
A Speed Queen dryer in North Canton stopped working completely for a customer who confirmed it had power and was properly plugged in. The unit wouldn’t turn on at all, which led us to investigate the internal drive system where we found a broken belt wrapped around the motor pulley. The Problem The customer reported … Read more
A Whirlpool dryer on Maplegrove Street in Louisville wasn’t drying clothes and had no heat. We found the heating element had failed completely — burned out with visible breaks in the coil. The dryer cavity was also packed with hair and lint that restricted airflow through the system. The Problem The customer reported their dryer … Read more
The dryer was running but not heating. After replacing the heater coil valves, idler pulley, and drum support wheel, it started heating properly.