A Kenmore washer at a home on Kenyon Avenue NW in Massillon quit spinning and didn’t drain during the cycle. The customer could hear it trying to work but nothing happened when it should have spun and drained. We found a failed drain pump that needed replacement. The Problem The washer quit spinning and didn’t … Read more
A customer in Salem, OH contacted us about their Kenmore refrigerator, reporting they thought the fan/motor was burned up with the compressor running but a smell of freon or burnt stuff coming from inside. When we arrived for service, the fridge was operating correctly at the time of service. The Problem The customer believed the … Read more
A Carrollton homeowner called about their Kenmore dryer that was not heating. They had another dryer they were using in the meantime. After our assessment, the age of the machine and cost of repairs led the customer to continue using their backup unit instead. The Problem The customer reported that their dryer was not heating. … Read more
A Kenmore dryer at a Canton home wasn’t producing any heat, leading the homeowner to suspect a failed heating element. When we arrived at the Hoover Place Northwest address, our diagnosis revealed the actual culprit was a failed thermostat system. The Problem The customer reported no heat and suspected the heating element was shot. The … Read more
A Kenmore dryer on Beauparc Drive in Akron wasn’t producing any heat. Another servicer had replaced the thermostat a month previously, but left a loosened connection which caused the thermostat to overheat and fail again. The Problem The customer reported no heat from their Kenmore dryer. This was particularly frustrating since another repair company had … Read more
The dryer wouldn’t start, so we replaced the thermal fuse and heating element, ensuring it runs efficiently again.
The washer stopped mid-cycle, but after replacing the door switch, it’s now running smoothly.
The washer was stuck full of water with the door locked. We replaced the drain pump to resolve the issue.
The dryer wouldn’t start due to a failed high limit thermal fuse. After replacement, it now heats and operates correctly.
The washer was leaking water, which was fixed by replacing the door boot.