We received a service call for an LG washer in Navarre, OH with a complaint of not washing properly. Upon arrival, our technician found the machine was cycling properly, but the customer declined to proceed with service. The Problem The customer reported their LG washer was not washing properly and scheduled a diagnostic appointment. Diagnosis … Read more
A Samsung front load washer in Hartville, OH wasn’t spinning correctly and appeared to have a loose drum. The customer could see the drum wasn’t spinning smoothly and suspected it was out of balance, though it wasn’t actually unbalanced. Our diagnosis revealed a broken spider/drum support assembly. The Problem The customer reported that their Samsung … Read more
A Samsung washer in Canton was throwing 4C and 0C error codes despite being only 4½ years old. The customer mentioned the unit had given trouble on and off since new. We found a clogged pressure tube causing the false water level readings. The Problem The washer kept giving 4C or 0C codes and had … Read more
A Maytag washer in Carrollton, OH wasn’t draining properly, leaving clothes soaked at the end of cycles. During our inspection, we discovered the transmission splines were worn, which caused the hub to strip. The Problem The customer reported that clothes are soaked when done. The washer was not draining the water out when it finished … Read more
We responded to a service call in Canton, OH for a commercial Whirlpool coin-op washer that wasn’t cycling well. Upon inspection, we discovered the balance ring had worked loose on the washer tub, causing the operational issues. The Problem The customer reported that the washer isn’t cycling well. This type of issue in commercial coin-operated … Read more
The washer failed to drain due to an F9 E1 error. Replacing the drain pump, pressure sensor, and control board resolved the issue.
The washer failed to drain due to a faulty lid switch, which was replaced to restore normal operation.
The washing machine wouldn’t start and just buzzed. Replacing the faulty capacitor on the motor resolved the issue.
The washer displayed an error code ‘drn’ indicating drainage issues. After replacing the drain pump, the washer is now functioning properly.
The washer displayed an F28 code due to a failed Motor Control Board, which was replaced to restore functionality.