Whirlpool Washer Repair (Model RTW4440VQ2) – Uniontown, OH
The washer was filling slowly during the rinse cycle and required manual intervention to continue. Cleaning the inlet screen resolved the issue.
The washer was filling slowly during the rinse cycle and required manual intervention to continue. Cleaning the inlet screen resolved the issue.
The refrigerator drawer was not closing properly, causing inconvenience. The issue was resolved by defrosting ice and installing a new drain tube.
The washer was experiencing errors during the cycle, which was resolved by replacing the wash tub.
The dishwasher was leaking from both sides of the door. Replacing the seal did not resolve the issue, indicating a potential door locking problem.
A Whirlpool refrigerator on Market Ave N in Hartville, OH was leaking from the water dispenser in the door. Our diagnosis revealed a seeping water valve that needed replacement to stop the leak and prevent ice blockage in the ice bin. The Problem The customer reported that their Whirlpool refrigerator was leaking from the water … Read more
A Whirlpool washer on Dogwood Ave NE in North Canton was displaying an F7E1 error code and failing to complete its cycle properly. The customer reported that the washer fills with water but does not drain or spin, with water remaining in the tub at the end of the cycle. Our inspection revealed significant internal … Read more
We completed a washer repair in Canton, OH for a customer whose Whirlpool washer had the lid locked and wouldn’t run. Our diagnosis revealed that the lid lock had shorted and damaged the control board, requiring replacement of both components to restore normal operation. The Problem The customer reported that their washer’s lid was locked … Read more
We recently completed a dual appliance repair at a home on Jewel Road in Carrollton, OH. The customer reported their Whirlpool dryer was not heating at all and their dishwasher does not run with water not entering. After diagnosis, we identified multiple component failures requiring parts replacement on both units. The Problem The homeowner contacted … Read more
A customer in Canton called about their Whirlpool washer leaving clothes still wet after the spin cycle, though some settings were still working. Our diagnosis revealed a plugged cold water screen that was preventing the machine from completing its final rinse cycle. The Problem The customer reported that clothes were still wet after the spin … Read more
A Whirlpool washer in Canal Fulton was showing a PF error and the door would lock on start but wouldn’t reopen. After checking everything over, we determined the unit appeared okay and recommended having an electrician address potential breaker issues. The Problem The customer reported that their Whirlpool washer door locks on start and won’t … Read more