A Whirlpool washer in Canton, OH wouldn’t fill up when the lid is locked. Our diagnostic revealed multiple error codes pointing to main control board failure, though additional mechanical issues couldn’t be ruled out due to the electrical problems. The Problem The customer reported that their Whirlpool washer won’t fill up when the lid is … Read more
A Whirlpool dishwasher in North Canton wasn’t running properly — it said it was running but water wasn’t going into the parts to spin. We found the water circulation pump had failed, preventing proper water flow throughout the wash cycle. The Problem The dishwasher will not run. It says that it’s running but the water … Read more
We serviced a Whirlpool washer in Diamond, OH that had the door locked, wouldn’t drain, and was making a buzzing sound. Our technician found a broken drill bit jammed in the pump impeller, preventing it from spinning properly. The Problem The customer reported that the door was locked, the washer wouldn’t drain, and something was … Read more
We received a call from Alliance, OH about a Whirlpool refrigerator where the freezer was fine but the fridge wasn’t cooling. Our diagnosis revealed a failed control board where the compressor relay was stuck, preventing proper defrosting. The Problem The customer reported that their freezer was fine but the fridge wasn’t cooling. This is a … Read more
A North Canton homeowner called about a Whirlpool dishwasher that wasn’t installed properly and was tipping forward out of its place. The unit needed to be fastened and screwed in properly to prevent the dangerous forward tipping. The Problem The dishwasher wasn’t installed properly and was tipping forward out of its place. This created a … Read more
A Whirlpool washer in Hanoverton was leaking water, prompting a service call to diagnose the issue. Upon inspection, we found water splashing from between the detergent cup in the wash machine tub, with failing bearings adding to the unit’s problems. The Problem The customer reported water leaking from their Whirlpool washer. Water was visibly escaping … Read more
A Whirlpool Cabrio washer in Louisville, OH was stuck mid-cycle with water that wouldn’t drain. The homeowner called us when their machine displayed error codes and refused to complete any wash cycle. The Problem The customer reported that their washer does not complete wash cycle and water will not drain. The machine was displaying multiple … Read more
A Whirlpool washer service call in Hanoverton brought us to a unit with a broken agitator. Our diagnosis revealed the transmission had failed, leading the customer to decide on replacement rather than repair. The Problem The customer reported that the agitator is broke. This prevented the washer from properly cleaning clothes during the wash cycle. … Read more
A Whirlpool washer in Minerva had an agitator that wouldn’t spin. When we opened it up, we found the agitator was stripped and needed replacement. The Problem The customer reported that the agitator won’t spin. This left clothes poorly cleaned since the agitator provides the washing action that moves water and detergent through the load. … Read more
A Whirlpool refrigerator in Minerva wasn’t keeping the freezer cold while the main compartment worked normally. We diagnosed a weak cooling system, likely caused by a refrigerant leak that would make repair uneconomical. The Problem The customer reported their fridge was working normally, but the freezer section wasn’t maintaining proper temperature. This selective cooling failure … Read more