A JennAir dishwasher in North Canton wasn’t draining properly, leaving standing water after each cycle. Our diagnostic revealed a completely blocked drain hose that needed thorough cleaning to restore proper drainage. The Problem The dishwasher is not draining. Water was remaining in the bottom of the tub after wash cycles completed, preventing the unit from … Read more
A homeowner in North Canton called about their Admiral dishwasher constantly giving an i20 error code and refusing to run or drain water. Despite cleaning the filter and checking the drain hose, the problem persisted—pointing to a failed pressure sensor that couldn’t detect proper water levels. The Problem The customer reported their dishwasher was constantly … Read more
A GE dishwasher in Canton, OH had power and lights but wouldn’t start, with the customer unsure if it could sense the door position. Our diagnosis revealed rodent damage to the DC harness and a failed main control board requiring both components to be replaced. The Problem The power is on and it lights up. … Read more
We responded to a service call in Canton, OH for an Admiral dishwasher that was not draining. What started as a simple drainage issue revealed multiple problems that led to the customer’s decision to replace the unit entirely. The Problem The customer reported their dishwasher was not draining properly. Water was remaining in the bottom … Read more
We recently completed a dishwasher repair on Glendevan Street in Massillon for a customer experiencing loud noise while washing. The Kenmore dishwasher had a failed sump/wash pump assembly causing the disruptive operation during wash cycles. The Problem The customer reported loud noise while washing. The dishwasher was making excessive noise during the wash cycle, disrupting … Read more
We responded to a call in Canton, OH for a Whirlpool dishwasher with a clogged drain. The customer needed help repairing their unit that wasn’t draining properly. Our diagnosis revealed an obstructed drain line that required clearing and reassembly. The Problem The customer reported a clogged drain and needed help repairing their Whirlpool dishwasher. The … Read more
We received a service call in Alliance for an Admiral dishwasher that won’t start. The homeowner was frustrated because the unit had power but wouldn’t respond to any button presses. What we discovered was a simple but commonly overlooked issue. The Problem The customer reported their dishwasher won’t start. The unit had power and displayed … Read more
A KitchenAid dishwasher in Louisville was stopping mid-cycle with flashing lights, requiring hours before it would restart. Our diagnosis revealed a failed main control board that needed replacement to restore normal operation. The Problem The customer reported that their dishwasher would just stop running anytime during the wash cycle and the lights would flash sometimes … Read more
We received a service call for an Admiral dishwasher leaking water at a home on Millstream Court in Copley, OH. The customer reported water appearing around the unit during operation. Our inspection revealed the source was the door vent area. The Problem The customer contacted us because their Admiral dishwasher was leaking water. Water was … Read more
A customer in Canton, OH called about water leaking from the bottom of their Frigidaire dishwasher onto the floor. The water was dripping from the bottom during cycles. Our inspection revealed multiple seal and component failures that were allowing water to escape the wash chamber. The Problem Water was leaking from the bottom of the … Read more