Samsung Dryer Repair (Model NA) – Canton, OH
The dryer was making noise due to a failed idler pulley, which was replaced to restore normal operation.
The dryer was making noise due to a failed idler pulley, which was replaced to restore normal operation.
The dryer required the start button to be held down to run, which was fixed by correcting the wiring and replacing the front bearing kit.
The dryer was not getting hot during operation, which was resolved by installing a new heating element assembly.
A Canton homeowner called about their Whirlpool dryer repeatedly shredding belts with a knocking sound and drum stopping when loaded with clothes. After diagnosing the unit, we confirmed it needs a pulley and belt replacement, but the customer opted to handle the repair themselves. The Problem The customer reported their dryer was repeatedly shredding the … Read more
A Whirlpool dryer in Mineral City wasn’t heating despite running normally. The homeowner suspected lint buildup after 12 years without vent cleaning, but the real culprit was failed heating components that needed replacement. The Problem The dryer runs, but doesn’t heat. The customer noted seeing a large amount of lint when looking down where the … Read more
A Samsung dryer in Canton, OH wasn’t heating up properly. The customer reported their clothes were staying damp after full cycles. Our diagnosis revealed a failed heating element that needed replacement. The Problem The customer called because their Samsung dryer was not heating. Clothes were tumbling but coming out damp and cold after complete dry … Read more
We responded to a safety concern on Woodland Avenue Northwest in Canton, OH for a Samsung dryer with lint buildup and a weird burning smell from the back. Upon inspection, we found the dryer had experienced a lint fire inside the unit. The Problem The customer reported lint buildup and a weird/burning smell from back … Read more
We serviced a Samsung dryer on Arnold Ave NW in Canton, OH that powered on but wouldn’t spin. The drum does not spin or rotate, which pointed to a drive belt issue that we confirmed during inspection. The Problem The customer reported that their dryer powers on but the drum does not spin or rotate. … Read more
We received a service call for an LG dryer in Akron that was showing a Flow Sense light (d80) error and would not heat. The customer had already checked the duct tube and vents but was still getting the error code. The Problem The dryer was displaying a Flow Sense light (d80) error after test … Read more
A Samsung dryer on Weston Place Avenue Northwest in North Canton wasn’t starting reliably and had developed a burned belt smell. The drum hadn’t been turning until manually rotated a few times, and this was a repeat issue from a previous service call months earlier. The Problem The customer reported that the drum hasn’t been … Read more