A GE range on Merrimack Ave NE in Hartville wasn’t heating properly on the front right burner, and the hot surface indicator light stayed on constantly. Our diagnosis revealed the front right hand burner probe was shorted, requiring a complete burner element replacement. The Problem The customer reported that the hot surface indicator light stays … Read more
A customer in North Canton called about their front-load GE washer not draining properly. The filter had been checked and seemed fine with no error codes showing, but the pump could be heard trying to run. Our diagnosis revealed a failed drain pump that needed replacement. The Problem The customer reported their front-load GE washer … Read more
A GE washer in Canton, OH was leaving half the clothes dry while the other half stayed very wet after the wash cycle. The customer had to run extra spin cycles to get their laundry properly drained. We found the drain hose was laying on the floor, allowing the water to drain out during the … Read more
A customer in Mineral City called about their GE washer that won’t spin. When we opened up this WKSE5260E1WW unit, we found the bearings and tub seal had gone out, causing the washing machine to quit spinning the clothes out properly. The Problem The customer reported their GE washer won’t spin. This meant clothes were … Read more
A customer in Bolivar called Louisville Appliance Repair for routine filter replacements on their GE refrigerator and microwave combo. They had already purchased the water filter but needed our help installing it along with a new charcoal filter for the microwave. The Problem The customer needed to change the filter on their fridge and replace … Read more
We responded to a service call in New Philadelphia, OH for a GE refrigerator with an icemaker making a lot of noise. The customer’s GSS22JETGWW model had developed a mechanical issue that was creating disruptive sounds during the ice-making cycle. The Problem The customer reported that their GE refrigerator’s icemaker was making a lot of … Read more
A customer in Hiram contacted us about their brand new GE washer experiencing strange issues like running without lights on and a full tank light being on. Our diagnosis revealed software-related faults and an empty detergent tank causing the indicators. The Problem The washing machine is brand new but experiencing strange issues like running without … Read more
A GE washer on Lakeside Dr in Akron, OH was experiencing leak/squeal and now not starting. Our diagnostic revealed multiple system failures on this less-than-two-year-old appliance requiring extensive repairs. The Problem The customer reported their GE washer had developed a leak/squeal and now not starting. This combination of symptoms typically indicates multiple component failures affecting … Read more
A GE refrigerator in Canton wasn’t dispensing water, even after the homeowner tried unfreezing the pipe and adjusting temperatures. Our diagnosis revealed a failed dispenser tube heater that needed replacement. The Problem The customer reported that their refrigerator water does not come out anymore. They had tried to unfreeze the pipe which worked for a … Read more
A customer on North Marion Avenue in Louisville called about their GE range running gas constantly when the oven was on, even after reaching temperature. What we found was an igniter positioning issue from a previous DIY repair attempt. The Problem The customer reported that since a repair the day before, the gas was constantly … Read more