A GE dishwasher in Canton, OH had power and lights but wouldn’t start, with the customer unsure if it could sense the door position. Our diagnosis revealed rodent damage to the DC harness and a failed main control board requiring both components to be replaced. The Problem The power is on and it lights up. … Read more
A GE dryer at 2225 Rummell Ave NE in Paris, OH was making a high pitched squeaking noise during operation. Our inspection revealed worn front bearing components that needed replacement to restore quiet operation. The Problem The customer reported their dryer was making a high pitched squeaking noise. This type of noise typically indicates worn … Read more
We serviced a GE oven/stove at 389 Sherman St in Akron, OH where the customer reported that three eyes on the stove doesn’t work. What we found was a simple installation issue rather than failed components. The Problem The customer contacted us about three burners on their GE stove that weren’t working. This was affecting … Read more
We received a call from Canton, OH about a GE refrigerator that wasn’t holding proper temperatures. The temp was set at 37/0 but the reading showed 60/-5, indicating a serious cooling problem that needed immediate attention. The Problem The customer reported that their refrigerator temperature was set at 37°F for the fresh food compartment and … Read more
A GE dryer at 604 Weber Avenue Northeast in North Canton, OH wouldn’t start for our customer. They also noticed condensation inside the dryer a few weeks ago, even though the dryer hadn’t been used in days. We found a blown thermal fuse causing the no-start condition. The Problem The customer reported that their dryer … Read more
A GE dishwasher on Broad Avenue NW in Canton, OH had stopped working due to a failed user interface. The customer reported that the dishwasher was not working again and needed the user interface replaced. The Problem The dishwasher was not working again. The user interface needed to be replaced, preventing normal operation of the … Read more
A GE dryer on Beech Street Northeast in Louisville wasn’t starting after the customer heard the timer snap. When we arrived, we found the timer knob had broken completely, preventing the dryer from operating. The Problem The customer tried to turn on the timer and heard it snap. When they pushed on the button, the … Read more
A GE washer in Waynesburg, OH was powering on and filling water but would not wash, drain or spin. The gearbox on the washing machine was leaking oil, which softened the belt and caused it to fall off. The Problem The customer reported that their GE washer powers on and fills water but will not … Read more
We recently completed a refrigerator repair in Waynesburg, OH for a customer whose GE refrigerator wasn’t cooling properly. The freezer and ice maker were still working, but the fresh food section had lost cooling entirely. Our diagnosis revealed a failed evaporator fan in the fresh food compartment. The Problem The customer reported that their refrigerator … Read more
A GE oven in Canton, OH had a left hand switch that wouldn’t work despite the customer replacing the front left burner switch. We discovered one wire was simply in the wrong place and corrected the connection. The Problem The customer reported that the left hand switch doesn’t work. They had already tried replacing the … Read more