A Kenmore dishwasher in Hartville was leaking sporadically. When we inspected the unit, we found the top spray arm was cracked, which was allowing water to escape during wash cycles. The Problem The customer reported their dishwasher was leaking. The leak wasn’t constant — it happened sporadically during operation, making it harder to pinpoint the … Read more
A Kenmore oven in Alliance wasn’t heating despite the ignitor glowing. The ignitor was glowing but the oven wouldn’t light, preventing normal cooking. We found the ignitor was weak and needed replacement. The Problem The customer reported that the ignitor glows but oven won’t light. This is a classic symptom where the ignitor appears to … Read more
A Kenmore washer in North Canton was showing the F21 code and leaving clothes soaking wet after the wash cycle. The customer reported that the washer hadn’t done the spin cycle, and attempts at second rinse and extended spin cycles only triggered more error codes. We found small articles of clothing sucked into the drain … Read more
A Kenmore dishwasher in North Canton had a common but frustrating problem — the top rack’s white rollers broke and no longer supported the front portion of the upper rack. Both sides were damaged, making the rack difficult to slide in and out properly. The Problem The customer reported that the top rack has white … Read more
We serviced a Kenmore dryer and refrigerator combo job in Canton, OH this week. The customer reported a bearing issue in the dryer and a loud humming refrigerator that wasn’t cooling properly. Our diagnosis revealed two separate but fixable problems. The Problem The customer called about bearing noise in their Kenmore dryer. Additionally, their fridge … Read more
A Kenmore refrigerator at the Food Pantry in Columbiana, OH wasn’t getting cold. Our diagnosis revealed a failed start device that needed replacement to restore proper cooling. The Problem The refrigerator won’t get cold. The unit was completely unable to maintain proper temperatures, affecting the Food Pantry’s ability to safely store perishable donations. Diagnosis Testing … Read more
A Kenmore dryer in Hartville wouldn’t start — just hummed when the customer pressed the button. We found the blower was jammed, preventing the motor from turning over properly. The Problem The customer reported their dryer motor won’t start, just hums. This is a classic symptom of mechanical resistance somewhere in the drive system that’s … Read more
We serviced a Kenmore washer in Akron, OH where the water level stays low, agitation is constant and weak, the lid stopped locking, and it doesn’t switch cycles — all symptoms that started at the same time. Our diagnosis revealed a faulty control board affecting multiple functions. The Problem The customer reported that water level … Read more
A Kenmore 80 Series dryer in Beloit, OH wasn’t heating properly. The homeowner noticed intermittent heating that made clothes take much longer to dry. Our diagnosis revealed failed coil packs on the valve that were causing the inconsistent heating performance. The Problem The customer reported their Kenmore dryer was not heating properly. The unit would … Read more
A Kenmore dishwasher at a Louisville home wouldn’t start, leaving the customer wondering if it was a motor control panel or latch lock issue. Our diagnosis revealed something much simpler — a loose wire connection that had worked free over time. The Problem The customer reported their dishwasher won’t start. They had done some research … Read more