A homeowner in Alliance called about their Kenmore dishwasher making a loud noise while running. We found some plastic chunks in pump chopper/screen that were causing the noise issue. The Problem The customer reported their dishwasher was making a loud noise while running. This type of noise typically indicates something is interfering with the wash … Read more
We got a call from new homeowners in Massillon who were dealing with multiple issues on their combination oven and microwave unit. The microwave wouldn’t heat and produced a terrible burnt plastic smell, while the oven was tripping breakers and not reaching proper temperatures. What we found was a dangerous electrical connection and a failed … Read more
A Canton homeowner called about their Kenmore refrigerator running warm with a door divider that was hot to the touch. The refrigerator compartment was running at 50°, though the freezer seemed to be working normally. Our inspection revealed ice buildup around the fresh food evaporator fan that was blocking proper airflow. The Problem The customer … Read more
We serviced a Kenmore oven in North Canton that was beeping and flashing F1. The control board had failed and needed replacement to restore normal operation. The Problem The customer reported their oven was beeping and flashing F1 and needed repair. This F1 error code indicates a control board malfunction that prevents the oven from … Read more
A customer in Alliance called about their Kenmore washer that becomes off-balanced no matter how small the load. Even with just one towel, the washer still becomes unbalanced with a deafening sound and moves forward. Our diagnosis revealed multiple failed components that made replacement the better option. The Problem The washer becomes off-balanced, no matter … Read more
A Canton homeowner called after being unable to open their oven door and receiving error messages F30. Another repair company had already attempted the job but couldn’t fix it, so they gave the customer our number. The Problem The customer was unable to open oven door and receiving error messages F30. A previous repair company … Read more
We serviced a Kenmore refrigerator in Canton, OH that was not cooling. The homeowner called when their food started warming up and the compressor wasn’t running consistently. Our diagnosis revealed a failed cold control thermostat that needed replacement. The Problem The customer reported their Kenmore refrigerator was not cooling. The unit had stopped maintaining proper … Read more
A Kenmore washer at 8371 Walnut Street Southwest in Sherrodsville was leaking water underneath. The homeowner reported the water leaks underneath, and our diagnosis revealed an intermittent leak that appeared in two spots under the washer after it had been spinning for a while. The Problem The customer called because the water leaks underneath their … Read more
We returned to a Canton home where we had recently replaced a panel board on a Kenmore dryer. The customer called because the dryer works but it’s not drying clothes properly — they never get completely dry. What we found was a simple but critical oversight from the initial installation. The Problem The customer reported … Read more
We received a call from Akron, OH about a Kenmore washer that does not complete the cycle. Our diagnostic revealed multiple fault codes pointing to control board failure, prompting us to recommend replacement over repair. The Problem The customer reported their Kenmore washer does not complete the cycle. They mentioned it won’t operate unless they … Read more