We recently completed a washer repair in Salem, OH for a customer whose Admiral washer was leaking water and would not drain. The bearings and seal on the drain pump had gone bad, causing water to leak out of the bottom of the washing machine, and by the time we arrived, the pump had locked … Read more
A service call in Alliance brought us to a Kenmore washer with quarters stuck in the coin mechanism. What started as a simple coin jam turned into a lock replacement when we discovered the root cause during our diagnostic process. The Problem The customer reported that their washer had quarters stuck in the wash machine. … Read more
A Strasburg homeowner called us because their Maytag washer wasn’t getting clothes all the way clean, despite having another company service it in August. Our diagnosis revealed the agitator had stripped again and wasn’t washing properly. The Problem The washer isn’t getting clothes all the way clean. The customer mentioned that Billmans came to repair … Read more
A Maytag washer in East Sparta was experiencing intermittent cycle completion issues. The customer reported that it would start but sometimes wouldn’t finish the wash cycle. Our inspection revealed inlet screens that were completely plugged with debris. The Problem The customer’s Maytag MVWC350AW1 washer was not completing cycle sometimes. It would start the wash cycle … Read more
A Maytag Centennial washer in Carrollton, OH stopped working completely when the drum wouldn’t spin or wash. Our diagnosis revealed that the bearings had failed in the washing machine, making repair uneconomical for this older unit. The Problem The customer reported that the drum won’t spin or wash. The washer had become completely non-functional, unable … Read more
We responded to a service call in Canton for an LG washer displaying an OE error code and refusing to drain. The customer’s WM3570HVA had completely stopped pumping water out during the drain cycle, leaving clothes soaking wet at the end of every wash. The Problem The customer reported an OE error code and that … Read more
A Kenmore washer at a home on Kenyon Avenue NW in Massillon quit spinning and didn’t drain during the cycle. The customer could hear it trying to work but nothing happened when it should have spun and drained. We found a failed drain pump that needed replacement. The Problem The washer quit spinning and didn’t … Read more
A Canton homeowner contacted us after moving their Whirlpool Cabrio washer to a new location. They had over-tightened the inlet valve for the hot water line during installation, stripping the connection and causing a leak. They already had the replacement part from Whirlpool and needed professional installation. The Problem The customer moved locations and when … Read more
A coin operated washer at a rental property on Fairlawn Avenue in Louisville had developed a loud knocking sound during the spin cycle, and the agitator arm had stopped spinning entirely. The customer had already replaced the agitator dogs but the problem persisted, indicating a deeper mechanical failure in the drive system. The Problem The … Read more
We received a call from a North Canton customer whose Admiral washer wouldn’t start when pushing the start button. Our diagnosis revealed the lid switch had failed, which prevents the washer from beginning its cycle as a safety feature. The Problem The customer reported that their washer will not start when pushing the start button. … Read more