Whirlpool Dishwasher Repair (Model WDT720PADM2) – Uniontown, OH
The dishwasher displayed flashing F2 and E2 errors without being turned on. Replacing the user interface board resolved the issue.
The dishwasher displayed flashing F2 and E2 errors without being turned on. Replacing the user interface board resolved the issue.
The dryer was taking a long time to dry clothes, and the oven clock wouldn’t turn on. Cleaning the vent and resetting the oven control fixed the issues.
The washer was not spinning due to a drain hose issue. Adjusting the hose fixed the long fill error.
The dryer was running but not producing heat. Replacing the heating element and thermostats resolved the issue.
The dishwasher had no power due to a wall switch being turned off. Once the switch was turned back on, the appliance functioned normally.
The Whirlpool front load washer displayed an E1 F6 error code and had a foul smell from the drain line. Replacing the control board and drain hose resolved the issues.
The washer wouldn’t drain or spin completely, making noise without moving. After a reset, it’s now running smoothly.
The washer only starts when the lid is closed and fails to fill with water, running through cycles instead. The inlet valve was replaced to resolve the issue.
The refrigerator was not cooling properly due to weak airflow and potential ice buildup. Cleaning the coils improved the temperature slightly.
The washer displayed a ‘dl’ error and wouldn’t start. Replacing the lid switch resolved the issue.