Maytag Dryer Repair (Model MEDC300BW0) – Alliance, OH
The dryer made loud squeaks and squeals at startup. Worn drum rollers and a rough idler pulley were replaced, eliminating the noise; heater checked OK.
The dryer made loud squeaks and squeals at startup. Worn drum rollers and a rough idler pulley were replaced, eliminating the noise; heater checked OK.
Dryer had no heat. Replaced the heating element assembly (element, thermal fuse, cycling thermostat) and a worn idler pulley to restore proper drying.
This Amana dryer (NGD5100TQ1) had no heat and the timer wouldn’t advance. Replacing a burned thermal fuse restored proper heating and timer operation.
The refrigerator was cycling sporadically and icing up due to a leaking water inlet valve. We replaced the valve and defrosted the freezer and drain to restore cooling.
Agitator wasn’t moving and the basket wouldn’t engage. Replacing the wash plate and spin hub restored proper agitation and spin.
The refrigerator section stopped cooling while the freezer worked. Replaced the fridge evaporator cover (with new fan and sensor), cleared and updated the defrost drain and heat probe.
Washer was stuck in drain and couldn’t change cycles. Replacing the pressure switch and running calibration restored normal operation.
The GE washer’s lid lock failed, preventing cycles from starting. Replacing the lid lock assembly restored normal operation.
This LG washer in Uniontown, OH showed an OE error and wouldn’t drain due to a failed drain pump. Replacing the pump restored proper draining and quieter cycles.
The GE dishwasher wouldn’t start and the lock light flashed. A tripped CSM safety module was reset and the filter, float sensor, and sump were cleaned.