Samuel Willhite A Whirlpool dryer in Minerva wasn’t tumbling despite the motor running, leading the homeowner to suspect a belt issue. Our diagnosis confirmed the customer’s hunch — the drive belt had failed along with worn pulleys that needed replacement. The Problem The customer reported that their dryer was not tumbling (spinning), though the motor was still … Read more
A customer in Alliance, OH called about their Whirlpool washer that wouldn’t complete cycles properly. The washer would wash and drain but then blink on the wash cycle without spinning, forcing the customer to wring out clothes by hand. Our diagnosis revealed a faulty lid lock assembly triggering an F5E1 error code. The Problem The … Read more
A Whirlpool dishwasher in North Canton wasn’t running properly — it said it was running but water wasn’t going into the parts to spin. We found the water circulation pump had failed, preventing proper water flow throughout the wash cycle. The Problem The dishwasher will not run. It says that it’s running but the water … Read more
A Whirlpool washer in Canton, OH wouldn’t fill up when the lid is locked. Our diagnostic revealed multiple error codes pointing to main control board failure, though additional mechanical issues couldn’t be ruled out due to the electrical problems. The Problem The customer reported that their Whirlpool washer won’t fill up when the lid is … Read more
A GE refrigerator in Canton, OH was pooling water under the deli tray and freezing, no longer dispensing water, and making less ice than normal. We found a cracked water line and a plugged defrost drain that required updated parts to resolve. The Problem The customer reported water pooling under the deli tray and freezing. … Read more
A Frigidaire stove in OH, OH was running into a dangerous overheating problem. When you use the oven it just keeps heating and won’t stop. Our diagnosis pointed to a failed control board that lost the ability to regulate temperature. The Problem The customer reported that when you use the oven it just keeps heating … Read more
A customer in Massillon called about their Admiral dishwasher having control panel issues. The lights would just flash on the user interface and it would not initiate a wash cycle. After replacing the user interface, the dishwasher works properly. The Problem The customer reported something wrong with the control panel. The lights would just flash … Read more
A washer repair call in Canton brought us to a 2019 LG front-load washer with water leaking from the bottom. The customer reported water pooling underneath the unit during wash cycles. Our diagnosis revealed a split cold water fill hose shooting water directly into the cabinet. The Problem Water is leaking from the bottom of … Read more
A Kenmore dishwasher on Rocky Hollow Drive in Akron had top sliding drawer slides that were broken. We found that Whirlpool had issued an updated version of the top drawer rollers to address this common failure point. The Problem The customer reported that the top sliding drawer slides were broken on their Kenmore dishwasher. The … Read more
A GE oven in Canton, OH had a left hand switch that wouldn’t work despite the customer replacing the front left burner switch. We discovered one wire was simply in the wrong place and corrected the connection. The Problem The customer reported that the left hand switch doesn’t work. They had already tried replacing the … Read more