A customer in Akron called about their GE gas range having numbers wearing off and knob dials not correlating with flame strength. We also found their garbage disposal wouldn’t turn on during our visit. The Problem The homeowner reported that numbers were wearing odd on the range and the knob dials weren’t correlating with the … Read more
A GE dishwasher in Uniontown, OH had power but no display on the unit. We found the main control board and user interface had failed, requiring replacement of multiple electrical components to restore full operation. The Problem The customer reported having power to the dishwasher but no display on the unit. The dishwasher appeared to … Read more
A customer in Alliance called about their GE washer leaking with water on the floor. Our diagnostic inspection revealed the leak was coming from the dispenser area, with water valve and drawer assembly issues identified. The Problem The customer reported leaking with the floor getting wet around their GE washer. Water was pooling on the … Read more
A North Canton homeowner called when their GE washer filled with water but would not agitate or spin and was not draining. We found the unit full of water with a drain pump that was activating but not actually pumping water out. The Problem The customer reported that their washer fills with water but will … Read more
A customer in Akron reported a possible water leak at the front of their GE washer, with water appearing to come from the door seal and/or door lock area. After inspection, we found the actual source was corrosion from the dispenser drawer, though the customer declined the repair quote at this time. The Problem The … Read more
A GE dryer in Canton, OH was making a loud squeaky noise during the drying process. We diagnosed the issue and installed a GE repair kit to restore quiet operation. The Problem The customer reported their GE dryer was producing a loud squeaky noise during drying process. This type of noise typically indicates worn internal … Read more
The refrigerator was not cooling due to a jammed evaporator fan. Replacing the fan motor resolved the issue.
The dishwasher was leaking from the front left, but tightening a loose vent resolved the issue.
The refrigerator wasn’t cooling properly, leading to food spoilage. We replaced the evaporator and condenser fans to restore functionality.
The washer’s lid latch was broken, preventing it from locking. Replacing the lid lock assembly restored functionality.