A customer in Massillon called about their LG washer that wouldn’t spin out and was showing UE and OE error codes. This turned out to be a common programming issue with LG front load washers that required a control board replacement. The Problem The customer reported that their washer won’t spin out and was displaying … Read more
The dishwasher displayed an IE error, indicating a water inlet issue. After inspection, the problem was resolved without needing a new valve.
The washer failed to pump out water and spin, but after replacing the drain pump and main bearings, it now operates normally.
The washer was making a grinding noise during cycles, which was resolved by replacing the bearing housing assembly.
The washer displayed an OE error and failed to drain, preventing it from completing cycles. The water pump was replaced to resolve the issue.
We received a service call in Massillon, OH for an LG stove that wasn’t heating properly. The customer’s oven had stopped working, and our diagnosis revealed multiple electrical issues preventing proper operation. The Problem The customer reported their oven was not heating properly. The unit would turn on but failed to reach the set temperature, … Read more
We responded to a service call in Canton for an LG washer displaying an OE error code and refusing to drain. The customer’s WM3570HVA had completely stopped pumping water out during the drain cycle, leaving clothes soaking wet at the end of every wash. The Problem The customer reported an OE error code and that … Read more
We responded to a service call in Alliance, OH for an LG refrigerator with a water line leak on the back of the unit. Our diagnosis revealed multiple water system components had failed and needed replacement. The Problem The customer reported that the water line on the back of the fridge was leaking. This type … Read more
A Canton homeowner called about their LG oven losing temperature after preheating. After pre-heat temp is reached in the oven, the temp is not maintained and drops off. We found a failed ignitor that couldn’t maintain the gas flame needed to hold steady temperatures. The Problem After pre-heat temp is reached in the oven, the … Read more
A North Canton customer called about water leaking onto the floor from underneath their LG washer. When the filter was removed, more water than normal gushed out, leading to concerns about a possible drain line blockage. We found the hot water valve was seeping and needed replacement. The Problem Water was leaking onto the floor … Read more