A Samsung oven on Castle Boulevard in Akron wasn’t reaching proper temperature during preheating. The homeowner wasn’t certain about the model number but provided NX58H9500WS from their manual. Our diagnosis revealed a failed oven ignitor preventing normal heating cycles. The Problem The customer reported their oven was not coming to temperature when preheating. This is … Read more
We diagnosed an LG oven in North Canton that wasn’t reaching temperature. The convection fan was failing intermittently, causing uneven heating and temperature control issues. The Problem The customer reported their oven not reaching temperature. The unit would heat but couldn’t maintain proper cooking temperatures consistently. Diagnosis The oven convection fan appears to be failing. … Read more
A customer in Minerva called with a GE gas oven that wouldn’t light. The ignitor had failed, leaving the oven unable to start the gas burner cycle. The Problem The customer reported that their oven won’t light. When they tried to use the oven, nothing happened — no ignition, no flame. Diagnosis We found the … Read more
A Frigidaire gas oven at a Minerva home wouldn’t preheat, leaving the homeowner unable to bake or roast. Our diagnosis revealed a failed bake igniter — the most common issue with Frigidaire and Electrolux gas ovens. The Problem The customer reported that their Frigidaire oven won’t preheat. The unit would not reach cooking temperature, making … Read more
A Maytag oven in Stow wasn’t heating properly due to a severed wire to the heating element. We repaired the terminal end connection on the bake element and restored normal operation. The Problem The customer reported that the wire to heating element is severed. This prevented the oven from heating correctly during baking cycles. Diagnosis … Read more
A homeowner in Alliance called when their Maytag gas range suddenly stopped working. The burners wouldn’t ignite and they didn’t smell any gas when turned on. What we found was a simple fix that didn’t require any parts. The Problem The customer reported that burners won’t ignite and they don’t smell any gas when turned … Read more
A Kenmore oven in North Canton had two problems: the left front burner wasn’t working and the broiler wouldn’t ignite despite the ignitor glowing. We found the issue was in the harness with surface igniter switches, which needed complete replacement. The Problem The customer reported issues with the left front burner, the small burner. The … Read more
A Samsung oven in Alliance wouldn’t light for a homeowner on West Summit Street. The customer reported their oven won’t light. We found the igniter had failed and replaced it with a new part. The Problem The customer called because their oven won’t light. This is a common issue with gas ovens when the igniter … Read more
A Samsung oven in Massillon wouldn’t ignite, leaving the homeowner without a working cooking appliance. Our diagnosis revealed a failed hot surface ignitor — a common failure point on gas ovens that prevents the safety valve from opening to release gas for combustion. The Problem The customer reported that their oven will not ignite. This … Read more
We recently serviced an Admiral oven at a home on Georgetown Street NE in Louisville, OH. The customer reported no response on the control panel, with the clock displaying but unable to change or set the oven temperature. Our diagnosis revealed a simple but effective solution. The Problem The homeowner contacted us because their oven’s … Read more