Magic Chef Washer Repair – Canton, OH
The water valve on the washer wouldn’t shut off, leading to continuous water flow. Replacing the valve resolved the issue.
The water valve on the washer wouldn’t shut off, leading to continuous water flow. Replacing the valve resolved the issue.
The washer displayed an OF error code and wasn’t draining properly. After replacing the cold water valve, the issue was resolved.
The dryer was not spinning properly, and the idler pulley was replaced to resolve the issue.
The washer was leaking from underneath but still functioning. A corroded hose was shortened to address the issue.
The refrigerator was not cooling properly, and the oven required calibration. Adjustments were made to improve performance.
The washer stopped after the wash cycle due to a loose drive belt, which was tightened to prevent further issues.
A Maytag washer in Canton, OH was filling with water but wouldn’t spin or agitate to wash the clothing. Our diagnosis revealed a broken wire on the motor that was preventing the wash action from engaging. The Problem The washer would start and fill with water normally, but it would not spin and actually wash … Read more
A Samsung washer at a home on Groton Street Northwest in Canton, OH was displaying an E3 error code and failing to spin. Samuel visited the residence to diagnose the issue and determined that the repair cost would exceed the practical value of the machine. Based on that assessment, replacing the washer was recommended as … Read more
The oven was not warming, but after replacing the bake igniter, it is now functioning properly.
The washer failed to power on, but after replacing the main control board, it was restored to full functionality.