Whirlpool Refrigerator Repair (Model ED5LHEXTD00) – Alliance, OH
The cold control thermostat failed, causing intermittent cooling. Replacing the thermostat restored consistent temperature.
The cold control thermostat failed, causing intermittent cooling. Replacing the thermostat restored consistent temperature.
Washer made a loud grinding noise during wash. Replaced the shift actuator and hub to eliminate the noise and restore smooth operation.
The Whirlpool dishwasher was not cleaning due to a clogged middle spray arm. We cleared the blockage and restored proper spray and wash performance.
The washer was faulting from oversized loads and a stretched, slipping drive belt. We replaced the belt and advised proper 2/3-full loading.
Alliance homeowner reported a freezer not defrosting. We tested the defrost system; no fault found during the visit and the unit operated normally.
Disposal wouldn’t turn on and the sink was backing up. Cleared a jam and reset the unit, restoring normal grinding and drainage.
The dryer made loud squeaks and squeals at startup. Worn drum rollers and a rough idler pulley were replaced, eliminating the noise; heater checked OK.
Dryer had no heat. Replaced the heating element assembly (element, thermal fuse, cycling thermostat) and a worn idler pulley to restore proper drying.
This Amana dryer (NGD5100TQ1) had no heat and the timer wouldn’t advance. Replacing a burned thermal fuse restored proper heating and timer operation.
The refrigerator was cycling sporadically and icing up due to a leaking water inlet valve. We replaced the valve and defrosted the freezer and drain to restore cooling.