A Canton homeowner called about their Frigidaire refrigerator not cooling with no lights working. We found multiple issues causing the unit to fail — a missing condenser coil fan cover, faulty cold control thermostat, and burned out lightbulbs. The Problem The customer reported their refrigerator was not cooling and had no lights. The unit wasn’t … Read more
The refrigerator’s ice maker stopped producing due to a stripped mechanism mid cycle. We replaced the ice maker assembly to restore ice production.
Oven would not heat while burners worked. Diagnosed a weak bake igniter and replaced it; the oven now heats and preheats normally.
A North Canton customer called about their Frigidaire refrigerator that had power but wasn’t cooling in either the fridge or freezer compartments. After unplugging and resetting the refrigerator, it started operating correctly again. The Problem There is power to the fridge but it is not cooling. Both fridge and freezer are affected. Diagnosis After unplugging … Read more
Oven was dead due to a failed clock/control board. Replaced the control panel/board and restored normal operation.
The ice maker filled whenever the water dispenser was used due to a failed water valve diode, creating blocky ice. Replacing the diode restored normal ice production.
A Frigidaire refrigerator in Minerva, OH was leaking water into the fridge compartment. Our diagnosis revealed a failed evaporator fan motor and drainage issues that required both motor replacement and drain kit installation to restore proper operation. The Problem The customer reported that water was leaking into the fridge compartment. This type of issue typically … Read more
A Frigidaire dryer on Johnson Ave in Louisville was making noise during operation. Our diagnosis revealed motor bearings going out, requiring a complete motor replacement to restore quiet operation. The Problem The customer reported their Frigidaire dryer was making noise during cycles. This type of noise complaint often points to worn internal components that need … Read more
Dryer squeaked and underheated due to an open heating element and worn drum bearing. Replaced element and bearing kit to restore heat and quiet operation.
Washer door wouldn’t close due to a broken door striker and damage at the hinge/outer panel. Replaced striker, hinge, and outer door panel to restore proper latching.